OWC 3L2D44R4256P 256GB (2x128GB) DDR4 3200 CL22 4Rx4 LRDIMM ECC 1.2V
- 256GB (2 x 128GB)
- 288-Pin DDR4 ECC LR…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
Single 256 GB DDR4 3200 CL22 8Rx4 ECC load-reduced LRDIMM for HP ProLiant DL385 Gen10 Plus, DL385 Gen10 Plus v2, DX360 Gen10 Plus and DX385 Gen10 Plus servers
This 256GB DDR4 LRDIMM operates at 3200MHz with CL22 latency and 1.2V power draw. It targets administrators upgrading HP ProLiant DL385 Gen10 Plus, DL385 Gen10 Plus v2, DX360 Gen10 Plus or DX385 Gen10 Plus systems. The module uses an 8Rx4 organisation and 288-pin form factor. It is not compatible with standard desktop computers or with unbuffered and registered ECC memory types.
Load-reduced architecture reduces electrical load on the memory bus, allowing the single 256GB module to maintain stability during extended multi-threaded tasks. The DDR4 PC4-25600 rating supports continuous throughput at 3200MHz, while backward compatibility lets the DIMM run at 2133MHz, 2400MHz, 2666MHz or 2933MHz when the platform requires it. ECC correction operates continuously to protect data integrity under heavy utilisation.
Operating at 1.2V keeps power draw low for a high-capacity server DIMM, reducing the thermal contribution inside dense chassis. The module produces no audible noise because it has no moving parts. JEDEC and RoHS compliance ensure consistent electrical characteristics across the operating temperature range defined by the host server platform.
ยังไม่มีข้อมูลจำเพาะที่เผยแพร่สำหรับสินค้านี้
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The module operates at 1.2V DDR4 voltage; actual sustained power draw depends on the platform's memory controller and workload, which the platform firmware manages.
The server must accept DDR4 ECC Load Reduced memory in 288-pin slots and cannot mix this module with unbuffered or registered ECC DIMMs.
Yes, it is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz speeds; the memory controller will negotiate the lowest common speed across populated slots.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม