Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular E1.L 9.5mm SSD with label showing 122.88TB capacity

Solidigm

Solidigm D5-P5336 122.88TB E1.L 9.5mm PCIe 4.0 x4 enterprise SSD SBFPFWBV0P12OF1

SKU CH-B2AW-9SCGC MPN SBFPFWBV0P12OF1

High-capacity 122.88 TB E1.L 9.5 mm PCIe 4.0 x4 enterprise SSD with 192-layer QLC 3D NAND, 7000 MB/s read, 3000 MB/s write, 900,000 random read IOPS, 18,000 random write IOPS.

  • Form FactorE1.L 9.5mm
  • Capacity122.88TB
  • Memory Components192 L QLC 3D NAND
  • InterfacePCI-Express 4.0 x4
  • Max Sequential ReadUp to 7000 MBps
  • Max Sequential WriteUp to 3000 MBps

Option 122.88TB E1.L FIPS

Näytä 21 muuta kokoonpanoa
  • Massive 122.88TB capacity fits more data per server
  • E1.L 9.5mm form factor enables dense storage deployments
  • PCIe 4.0 x4 interface delivers up to 7000 MB/s sequential reads
  • FIPS security meets strict data-protection requirements
  • 2,000,000-hour MTBF supports reliable long-term operation

Form factor and capacity

This Solidigm D5-P5336 is a 122.88TB enterprise SSD in the E1.L 9.5mm form factor. It is built for data-centre servers that need maximum density in a single slot. The drive uses 192 layer QLC 3D NAND and connects through a PCI-Express 4.0 x4 interface. Buyers who need a smaller physical size or a different interface cannot use this model.

Installation and common issues

The E1.L 9.5mm module slides into a compatible hot-plug bay and locks with the standard latch; no cables are required. Ensure the backplane and chassis both support the E1.L 9.5mm specification and PCIe 4.0 x4 electricals. A frequent mistake is fitting the drive into an E1.S or U.2 bay, which have different keying and will not seat correctly. The unit weighs 195g and draws up to 30W active, so verify the bay power budget before installation.

Pre-order checks

Confirm your server platform lists the E1.L 9.5mm form factor and PCIe 4.0 x4 support in its qualified vendor list. Check that the BIOS or firmware revision enables boot from this capacity class if a boot drive is intended. The drive operates from 0°C to 70°C and is rated for 2.17 GRMS operating vibration, so validate airflow and shock mounting in the target chassis. FIPS security features require host software or HSM integration to activate.

Kohokohdat

  • Massive 122.88TB capacity fits more data per server
  • E1.L 9.5mm form factor enables dense storage deployments
  • PCIe 4.0 x4 interface delivers up to 7000 MB/s sequential reads
  • FIPS security meets strict data-protection requirements
  • 2,000,000-hour MTBF supports reliable long-term operation

Tekniset tiedot

BrandSolidigm
ModelD5-P5336
Part NumberSBFPFWBV0P12OF1
Form FactorE1.L 9.5mm
Capacity122.88TB
Memory Components192 L QLC 3D NAND
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 7000 MBps
Max Sequential WriteUp to 3000 MBps
4KB Random ReadUp to 900,000 IOPS
4KB Random WriteUp to 18,000 IOPS
EnduranceUp to 0.60 DWPD, 134.3 PBW
MTBF2,000,000 hours
SecurityFIPS
Power Consumption (Idle)5W
Power Consumption (Active)30W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight195g +/- 10g
Lähetyspaino0.20 kg
Pakkauksen mitat150 × 120 × 20 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the drive is healthy after installing it in my server?

Check that the drive reports 122.88TB capacity, shows a PCIe 4.0 x4 link, and returns SMART values with zero media errors and a temperature between 0°C and 70°C.

What ships with the SBFPFWBV0P12OF1 and what must I supply myself?

The drive itself — a 195g E1.L 9.5mm module — is the only item included; you must provide a compatible E1.L cage, backplane, PCIe 4.0 x4 host connection and any mounting screws.

Which capacity and form-factor variant of the D5-P5336 should I select for a high-density read-heavy array?

This specific part number delivers 122.88TB in the E1.L 9.5mm form factor with 0.60 DWPD endurance, making it the highest-capacity option in this series for space-constrained, read-intensive workloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.