Solidigm D5-P5336 7.68TB E3.S 7.5mm PCIe 4.0 enterprise SSD SBFPFABV076TOP1
- E3.S 7.5mm
- 7.68TB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Solidigm
E3.S 7.5mm PCIe 4.0 x4 drive with 7.68TB QLC 3D NAND, 6800 MBps read, 1800 MBps write, 0.42 DWPD endurance and 2,000,000-hour MTBF
Option 7.68TB E3.S
The Solidigm D5-P5336 provides 7.68TB of storage in an E3.S 7.5mm form factor. It uses a PCI-Express 4.0 x4 interface and 192-layer QLC 3D NAND. Sequential reads reach up to 6800 MBps while sequential writes reach up to 1800 MBps.
This drive targets data-centre deployments that prioritise capacity and read throughput, such as content delivery or warm data tiers. Its 0.42 DWPD endurance rating and 17900 IOPS random write performance make it a poor fit for write-intensive databases or high-transaction logging.
Installation requires a server chassis or backplane that accepts the E3.S 7.5mm form factor and supplies a PCIe 4.0 x4 link. The 5W idle and 15W active power draw helps thermal planning, while the 90g weight adds minimal load to dense drive trays.
| Brand | Solidigm |
|---|---|
| Model | D5-P5336 |
| Part Number | SBFPFABV076T001 |
| Form Factor | E3.S 7.5mm |
| Capacity | 7.68TB |
| Memory Components | 192 L QLC 3D NAND |
| Interface | PCI-Express 4.0 |
| Max Sequential Read | Up to 6800 MBps |
| Max Sequential Write | Up to 1800 MBps |
| 4KB Random Read | 770000 IOPS (4K, QD256) |
| 4KB Random Write | 17900 IOPS (16K, QD256) |
| Endurance | 0.42 DWPD (16K RW) / 5.92 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 15W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 90g +/- 10g |
| Lähetyspaino | 0.17 kg |
| Pakkauksen mitat | 140 × 110 × 17 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the drive uses the E3.S 7.5mm form factor and requires a compatible hot-plug bay or backplane with the matching connector and mechanical latch.
It will operate at PCIe 3.0 speeds, limiting sequential reads to roughly half the 6800 MBps rating while writes and latency remain within the drive's 0.42 DWPD endurance envelope.
Check SMART attributes for media and data integrity errors, confirm the firmware reports 7.68TB capacity, and ensure idle power sits near 5W and active power near 15W under load.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?