SXDOOL
SXDOOL T127010SL 12V 0.18A 73mm 15-blade frameless VGA fan
12 V frameless graphics-card cooler with 15 blades, 73 mm diameter and 52×45×43 mm hole spacing
- 12 V, 0.18 A power draw keeps energy use low
- 15 blades move air through tight GPU heatsinks
- 73 mm frameless frame fits compact graphics cards
- 3-pin connector gives simple voltage control
- Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers
73 mm 15-blade frameless VGA cooler
This 73 mm frameless fan carries 15 blades and runs on 12 V at 0.18 A. It is built as a direct replacement cooler for graphics cards and similar compact devices. The three-wire, three-pin connector provides speed reporting to the host board. Mounting holes are spaced at 52 mm, 45 mm and 43 mm to fit specific card shrouds.
Fits exact 52×45×43 mm hole patterns only
The cooler suits repairers or upgraders who have verified those three screw-hole centres on their existing heatsink. It will not align with any other spacing, so builders using reference-design cards or aftermarket coolers with different mounting grids cannot use it. Buyers who cannot confirm the exact hole dimensions should look elsewhere.
52×45×43 mm mounting-hole triangle
The sole specification that decides fit is the trio of hole centres measuring 52 mm, 45 mm and 43 mm. Match those numbers to the graphics-card shroud before ordering; no other dimension or feature compensates for a mismatch.
Kohokohdat
- 12 V, 0.18 A power draw keeps energy use low
- 15 blades move air through tight GPU heatsinks
- 73 mm frameless frame fits compact graphics cards
- 3-pin connector gives simple voltage control
- Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
Will the 15-blade frameless rotor on the SXDOOL T127010SL need periodic cleaning or bearing replacement?
The frameless 15-blade rotor can be cleaned with compressed air; the 3-pin sleeve bearing is not user-serviceable so the whole fan is replaced when noise increases.
What thermal or electrical limit appears first when the 12 V 0.18 A fan runs continuously on a graphics card?
The 0.18 A current draw at 12 V sets the steady-state power limit; sustained operation stays within that envelope unless the GPU heatsink restricts airflow.
How much audible noise and case heat does the 73 mm frameless fan add during all-day use?
At 12 V the small 73 mm frameless design moves modest air volume, so acoustic output stays low and exhaust heat is barely measurable inside the chassis.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



