Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black frameless 73 mm fan with 15 blades and three-pin connector

SXDOOL

SXDOOL T127010SL 12V 0.18A 73mm 15-blade frameless VGA fan

SKU CH-WSC4-GJG1H

12 V frameless graphics-card cooler with 15 blades, 73 mm diameter and 52×45×43 mm hole spacing

  • 12 V, 0.18 A power draw keeps energy use low
  • 15 blades move air through tight GPU heatsinks
  • 73 mm frameless frame fits compact graphics cards
  • 3-pin connector gives simple voltage control
  • Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers

73 mm 15-blade frameless VGA cooler

This 73 mm frameless fan carries 15 blades and runs on 12 V at 0.18 A. It is built as a direct replacement cooler for graphics cards and similar compact devices. The three-wire, three-pin connector provides speed reporting to the host board. Mounting holes are spaced at 52 mm, 45 mm and 43 mm to fit specific card shrouds.

Fits exact 52×45×43 mm hole patterns only

The cooler suits repairers or upgraders who have verified those three screw-hole centres on their existing heatsink. It will not align with any other spacing, so builders using reference-design cards or aftermarket coolers with different mounting grids cannot use it. Buyers who cannot confirm the exact hole dimensions should look elsewhere.

52×45×43 mm mounting-hole triangle

The sole specification that decides fit is the trio of hole centres measuring 52 mm, 45 mm and 43 mm. Match those numbers to the graphics-card shroud before ordering; no other dimension or feature compensates for a mismatch.

Přednosti

  • 12 V, 0.18 A power draw keeps energy use low
  • 15 blades move air through tight GPU heatsinks
  • 73 mm frameless frame fits compact graphics cards
  • 3-pin connector gives simple voltage control
  • Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

Will the 15-blade frameless rotor on the SXDOOL T127010SL need periodic cleaning or bearing replacement?

The frameless 15-blade rotor can be cleaned with compressed air; the 3-pin sleeve bearing is not user-serviceable so the whole fan is replaced when noise increases.

What thermal or electrical limit appears first when the 12 V 0.18 A fan runs continuously on a graphics card?

The 0.18 A current draw at 12 V sets the steady-state power limit; sustained operation stays within that envelope unless the GPU heatsink restricts airflow.

How much audible noise and case heat does the 73 mm frameless fan add during all-day use?

At 12 V the small 73 mm frameless design moves modest air volume, so acoustic output stays low and exhaust heat is barely measurable inside the chassis.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.