暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SXDOOL

SXDOOL T127010SL 12V 0.18A 73mm 15-blade frameless VGA fan

SKU CH-WSC4-GJG1H

12 V frameless graphics-card cooler with 15 blades, 73 mm diameter and 52×45×43 mm hole spacing

  • 12 V, 0.18 A power draw keeps energy use low
  • 15 blades move air through tight GPU heatsinks
  • 73 mm frameless frame fits compact graphics cards
  • 3-pin connector gives simple voltage control
  • Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers

73 mm 15-blade frameless VGA cooler

This 73 mm frameless fan carries 15 blades and runs on 12 V at 0.18 A. It is built as a direct replacement cooler for graphics cards and similar compact devices. The three-wire, three-pin connector provides speed reporting to the host board. Mounting holes are spaced at 52 mm, 45 mm and 43 mm to fit specific card shrouds.

Fits exact 52×45×43 mm hole patterns only

The cooler suits repairers or upgraders who have verified those three screw-hole centres on their existing heatsink. It will not align with any other spacing, so builders using reference-design cards or aftermarket coolers with different mounting grids cannot use it. Buyers who cannot confirm the exact hole dimensions should look elsewhere.

52×45×43 mm mounting-hole triangle

The sole specification that decides fit is the trio of hole centres measuring 52 mm, 45 mm and 43 mm. Match those numbers to the graphics-card shroud before ordering; no other dimension or feature compensates for a mismatch.

特長

  • 12 V, 0.18 A power draw keeps energy use low
  • 15 blades move air through tight GPU heatsinks
  • 73 mm frameless frame fits compact graphics cards
  • 3-pin connector gives simple voltage control
  • Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the 15-blade frameless rotor on the SXDOOL T127010SL need periodic cleaning or bearing replacement?

The frameless 15-blade rotor can be cleaned with compressed air; the 3-pin sleeve bearing is not user-serviceable so the whole fan is replaced when noise increases.

What thermal or electrical limit appears first when the 12 V 0.18 A fan runs continuously on a graphics card?

The 0.18 A current draw at 12 V sets the steady-state power limit; sustained operation stays within that envelope unless the GPU heatsink restricts airflow.

How much audible noise and case heat does the 73 mm frameless fan add during all-day use?

At 12 V the small 73 mm frameless design moves modest air volume, so acoustic output stays low and exhaust heat is barely measurable inside the chassis.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。