نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black frameless 73 mm fan with 15 blades and three-pin connector

SXDOOL

SXDOOL T127010SL 12V 0.18A 73mm 15-blade frameless VGA fan

SKU CH-WSC4-GJG1H

12 V frameless graphics-card cooler with 15 blades, 73 mm diameter and 52×45×43 mm hole spacing

  • 12 V, 0.18 A power draw keeps energy use low
  • 15 blades move air through tight GPU heatsinks
  • 73 mm frameless frame fits compact graphics cards
  • 3-pin connector gives simple voltage control
  • Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers

73 mm 15-blade frameless VGA cooler

This 73 mm frameless fan carries 15 blades and runs on 12 V at 0.18 A. It is built as a direct replacement cooler for graphics cards and similar compact devices. The three-wire, three-pin connector provides speed reporting to the host board. Mounting holes are spaced at 52 mm, 45 mm and 43 mm to fit specific card shrouds.

Fits exact 52×45×43 mm hole patterns only

The cooler suits repairers or upgraders who have verified those three screw-hole centres on their existing heatsink. It will not align with any other spacing, so builders using reference-design cards or aftermarket coolers with different mounting grids cannot use it. Buyers who cannot confirm the exact hole dimensions should look elsewhere.

52×45×43 mm mounting-hole triangle

The sole specification that decides fit is the trio of hole centres measuring 52 mm, 45 mm and 43 mm. Match those numbers to the graphics-card shroud before ordering; no other dimension or feature compensates for a mismatch.

أبرز المميزات

  • 12 V, 0.18 A power draw keeps energy use low
  • 15 blades move air through tight GPU heatsinks
  • 73 mm frameless frame fits compact graphics cards
  • 3-pin connector gives simple voltage control
  • Mounting holes spaced 52 mm, 45 mm and 43 mm match many VGA coolers

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Will the 15-blade frameless rotor on the SXDOOL T127010SL need periodic cleaning or bearing replacement?

The frameless 15-blade rotor can be cleaned with compressed air; the 3-pin sleeve bearing is not user-serviceable so the whole fan is replaced when noise increases.

What thermal or electrical limit appears first when the 12 V 0.18 A fan runs continuously on a graphics card?

The 0.18 A current draw at 12 V sets the steady-state power limit; sustained operation stays within that envelope unless the GPU heatsink restricts airflow.

How much audible noise and case heat does the 73 mm frameless fan add during all-day use?

At 12 V the small 73 mm frameless design moves modest air volume, so acoustic output stays low and exhaust heat is barely measurable inside the chassis.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.