Thermaltake
Thermaltake Toughpower GT 750W power supply PS-TPT-0750FNFAGU-3
- Black
- ATX 12V
65,99 $
0.00086291BTC
Varastossa
Thermaltake
Thermaltake Toughpower GT 850W ATX 3.1 Snow power supply PS-TPT-0850FNFAGU-W
Fully modular 850 W ATX 3.1 power supply with 80 Plus Gold efficiency, native 12VHPWR connector and 12 cm hydraulic bearing fan
- ColorSnow
- TypeATX 3.1 Compatible
- Maximum Power850 W
- Fans12cm Hydraulic bearing fan
- PFCActive
- Max PSU Length140 mm
Options ATX 3.1 80+ Gold (850W) White
- ATX 3.1 80+ Gold (850W) Black
- ATX 3.1 80+ Gold (850W) White
- ATX 3.1 80+ Gold (750W) Black
- ATX 3.1 80+ Gold (750W) White
- 850 W output powers demanding graphics cards and CPUs
- 80 PLUS Gold efficiency reduces heat and electricity cost
- Full modular design keeps cable clutter to a minimum
- Native 12VHPWR connector supports modern GPU power delivery
- 12 cm hydraulic bearing fan runs quietly under load
ATX 3.1 power supply for modern builds
This Thermaltake Toughpower GT unit delivers 850 W through a fully modular design that meets the ATX 3.1 specification. It is intended for system builders who need a native 12VHPWR connection for current graphics cards and a clean cable layout.
Snow finish with hydraulic bearing fan and full
The 140 mm deep chassis uses a 12 cm hydraulic bearing fan that stops at low load under Smart Zero Fan control. Full modular cabling lets you attach only the 24 pin ATX, two 4+4 pin CPU, four 6+2 pin PCIe, one 12VHPWR, SATA and peripheral leads required for the build.
Check case depth and cable routing before ordering
Verify that your chassis can accommodate a 140 mm long power supply and that the 550 mm main cable reaches the motherboard connector. Confirm the 600 mm 12VHPWR lead suits your graphics card position and that the 700 mm CPU cables reach the socket without strain.
Kohokohdat
- 850 W output powers demanding graphics cards and CPUs
- 80 PLUS Gold efficiency reduces heat and electricity cost
- Full modular design keeps cable clutter to a minimum
- Native 12VHPWR connector supports modern GPU power delivery
- 12 cm hydraulic bearing fan runs quietly under load
Tekniset tiedot
| Brand | Thermaltake |
|---|---|
| Model | PS-TPT-0850FNFAGU-W |
| Color | Snow |
| Type | ATX 3.1 Compatible |
| Maximum Power | 850 W |
| Fans | 12cm Hydraulic bearing fan |
| PFC | Active |
| Max PSU Length | 140 mm |
| Modular | Full Modular |
| Power Good Signal | 100-250 msec |
| Hold-up Time | > 17msec at 80% load |
| Energy-Efficient | Meet 80 PLUS Gold at 115Vac input. |
| Protection | OVP/UVP/OCP/OPP/OTP/SCP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 10A Max. |
| Output | +3.3V@20A, +5V@20A, [email protected] , [email protected] , +5VSB@3A |
| MTBF | >100,000 Hours |
| Approvals | CE/UKCA/ICES/TUV/LVD/RCM/CB/FCC/cTUVus/BSMI/CCC/BIS/S-MARK |
| Connectors | 1 x 12VHPWR (12+4) PCIe / 1 x 24 pin (20+4) ATX / 4 x 4 pin Peripheral / 4 x 8 pin (6+2) PCIe |
| Cable Spec | 1 x Main Power (24Pin) x1 550mm 2 x ATX 12V(4+4Pin) x1 700mm 2 x PCIe(6+2Pin) x2 600mm+150mm 1 x PCIe(12+4Pin) 600W x1 600mm 2 x SATA (5Pin) x3 450mm+150mm+150mm 1 x Peripheral (4Pin) x4 400mm+150mm+150mm+150mm |
| Dimensions | 150 x 86 x140mm |
| Lähetyspaino | 1.13 kg |
| Pakkauksen mitat | 279 × 216 × 123 mm |
Tämän mallin muut versiot
3 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Thermaltake
Thermaltake PS-TPT-0750FNFAGU-W 750 W power supply
- White
- ATX 3.1 Compatible
70,99 $
0.00092829BTC
Varastossa
Thermaltake
Thermaltake Toughpower GT 850W power supply PS-TPT-0850FNFAGU-3
- Black
- ATX 12V
86,99 $110,99 $−22%
0.00113751BTC
VarastossaKysymyksiä tästä tuotteesta
What does the ATX 3.1 standard mean for the 12VHPWR connector on this unit?
The native 12VHPWR (12+4) PCIe connector is rated for 450 W and complies with the ATX 3.1 power excursion requirements for modern graphics cards.
Will the 140 mm depth fit in a standard mid-tower case?
At 140 mm long and 150 x 86 mm wide, it matches the typical ATX form factor used in most mid-tower chassis.
How do I connect the 12VHPWR cable without melting the plug?
Push the 12+4 pin connector straight in until the latch clicks; the 600 mm cable reaches most GPU positions without sharp bends.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00281128BTC
Varastossa
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00283743BTC
Varastossa
