Thermaltake Toughpower GT 750W power supply PS-TPT-0750FNFAGU-3
- Black
- ATX 12V
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Thermaltake
Fully modular 850 W ATX 3.1 power supply with 80 Plus Gold efficiency, native 12VHPWR connector and 12 cm hydraulic bearing fan
Options ATX 3.1 80+ Gold (850W) White
This Thermaltake Toughpower GT unit delivers 850 W through a fully modular design that meets the ATX 3.1 specification. It is intended for system builders who need a native 12VHPWR connection for current graphics cards and a clean cable layout.
The 140 mm deep chassis uses a 12 cm hydraulic bearing fan that stops at low load under Smart Zero Fan control. Full modular cabling lets you attach only the 24 pin ATX, two 4+4 pin CPU, four 6+2 pin PCIe, one 12VHPWR, SATA and peripheral leads required for the build.
Verify that your chassis can accommodate a 140 mm long power supply and that the 550 mm main cable reaches the motherboard connector. Confirm the 600 mm 12VHPWR lead suits your graphics card position and that the 700 mm CPU cables reach the socket without strain.
| Brand | Thermaltake |
|---|---|
| Model | PS-TPT-0850FNFAGU-W |
| Color | Snow |
| Type | ATX 3.1 Compatible |
| Maximum Power | 850 W |
| Fans | 12cm Hydraulic bearing fan |
| PFC | Active |
| Max PSU Length | 140 mm |
| Modular | Full Modular |
| Power Good Signal | 100-250 msec |
| Hold-up Time | > 17msec at 80% load |
| Energy-Efficient | Meet 80 PLUS Gold at 115Vac input. |
| Protection | OVP/UVP/OCP/OPP/OTP/SCP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 10A Max. |
| Output | +3.3V@20A, +5V@20A, [email protected] , [email protected] , +5VSB@3A |
| MTBF | >100,000 Hours |
| Approvals | CE/UKCA/ICES/TUV/LVD/RCM/CB/FCC/cTUVus/BSMI/CCC/BIS/S-MARK |
| Connectors | 1 x 12VHPWR (12+4) PCIe / 1 x 24 pin (20+4) ATX / 4 x 4 pin Peripheral / 4 x 8 pin (6+2) PCIe |
| Cable Spec | 1 x Main Power (24Pin) x1 550mm 2 x ATX 12V(4+4Pin) x1 700mm 2 x PCIe(6+2Pin) x2 600mm+150mm 1 x PCIe(12+4Pin) 600W x1 600mm 2 x SATA (5Pin) x3 450mm+150mm+150mm 1 x Peripheral (4Pin) x4 400mm+150mm+150mm+150mm |
| Dimensions | 150 x 86 x140mm |
| Shipping weight | 1.13 kg |
| Package size | 279 × 216 × 123 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The native 12VHPWR (12+4) PCIe connector is rated for 450 W and complies with the ATX 3.1 power excursion requirements for modern graphics cards.
At 140 mm long and 150 x 86 mm wide, it matches the typical ATX form factor used in most mid-tower chassis.
Push the 12+4 pin connector straight in until the latch clicks; the 600 mm cable reaches most GPU positions without sharp bends.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?