Thermaltake Toughpower GT 750W power supply PS-TPT-0750FNFAGU-3
- Black
- ATX 12V
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Thermaltake
Fully modular 850 W ATX 3.1 power supply with 80 Plus Gold efficiency, native 12VHPWR connector and 12 cm hydraulic bearing fan
Options ATX 3.1 80+ Gold (850W) White
This Thermaltake Toughpower GT unit delivers 850 W through a fully modular design that meets the ATX 3.1 specification. It is intended for system builders who need a native 12VHPWR connection for current graphics cards and a clean cable layout.
The 140 mm deep chassis uses a 12 cm hydraulic bearing fan that stops at low load under Smart Zero Fan control. Full modular cabling lets you attach only the 24 pin ATX, two 4+4 pin CPU, four 6+2 pin PCIe, one 12VHPWR, SATA and peripheral leads required for the build.
Verify that your chassis can accommodate a 140 mm long power supply and that the 550 mm main cable reaches the motherboard connector. Confirm the 600 mm 12VHPWR lead suits your graphics card position and that the 700 mm CPU cables reach the socket without strain.
| Brand | Thermaltake |
|---|---|
| Model | PS-TPT-0850FNFAGU-W |
| Color | Snow |
| Type | ATX 3.1 Compatible |
| Maximum Power | 850 W |
| Fans | 12cm Hydraulic bearing fan |
| PFC | Active |
| Max PSU Length | 140 mm |
| Modular | Full Modular |
| Power Good Signal | 100-250 msec |
| Hold-up Time | > 17msec at 80% load |
| Energy-Efficient | Meet 80 PLUS Gold at 115Vac input. |
| Protection | OVP/UVP/OCP/OPP/OTP/SCP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 10A Max. |
| Output | +3.3V@20A, +5V@20A, [email protected] , [email protected] , +5VSB@3A |
| MTBF | >100,000 Hours |
| Approvals | CE/UKCA/ICES/TUV/LVD/RCM/CB/FCC/cTUVus/BSMI/CCC/BIS/S-MARK |
| Connectors | 1 x 12VHPWR (12+4) PCIe / 1 x 24 pin (20+4) ATX / 4 x 4 pin Peripheral / 4 x 8 pin (6+2) PCIe |
| Cable Spec | 1 x Main Power (24Pin) x1 550mm 2 x ATX 12V(4+4Pin) x1 700mm 2 x PCIe(6+2Pin) x2 600mm+150mm 1 x PCIe(12+4Pin) 600W x1 600mm 2 x SATA (5Pin) x3 450mm+150mm+150mm 1 x Peripheral (4Pin) x4 400mm+150mm+150mm+150mm |
| Dimensions | 150 x 86 x140mm |
| وزن الشحنة | 1.13 kg |
| أبعاد الطرد | 279 × 216 × 123 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The native 12VHPWR (12+4) PCIe connector is rated for 450 W and complies with the ATX 3.1 power excursion requirements for modern graphics cards.
At 140 mm long and 150 x 86 mm wide, it matches the typical ATX form factor used in most mid-tower chassis.
Push the 12+4 pin connector straight in until the latch clicks; the 600 mm cable reaches most GPU positions without sharp bends.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟