Thermaltake Toughpower GT 750W power supply PS-TPT-0750FNFAGU-3
- Black
- ATX 12V
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Thermaltake
Fully modular 850 W ATX 3.1 power supply with 80 Plus Gold efficiency, native 12VHPWR connector and 12 cm hydraulic bearing fan
Options ATX 3.1 80+ Gold (850W) White
This Thermaltake Toughpower GT unit delivers 850 W through a fully modular design that meets the ATX 3.1 specification. It is intended for system builders who need a native 12VHPWR connection for current graphics cards and a clean cable layout.
The 140 mm deep chassis uses a 12 cm hydraulic bearing fan that stops at low load under Smart Zero Fan control. Full modular cabling lets you attach only the 24 pin ATX, two 4+4 pin CPU, four 6+2 pin PCIe, one 12VHPWR, SATA and peripheral leads required for the build.
Verify that your chassis can accommodate a 140 mm long power supply and that the 550 mm main cable reaches the motherboard connector. Confirm the 600 mm 12VHPWR lead suits your graphics card position and that the 700 mm CPU cables reach the socket without strain.
| Brand | Thermaltake |
|---|---|
| Model | PS-TPT-0850FNFAGU-W |
| Color | Snow |
| Type | ATX 3.1 Compatible |
| Maximum Power | 850 W |
| Fans | 12cm Hydraulic bearing fan |
| PFC | Active |
| Max PSU Length | 140 mm |
| Modular | Full Modular |
| Power Good Signal | 100-250 msec |
| Hold-up Time | > 17msec at 80% load |
| Energy-Efficient | Meet 80 PLUS Gold at 115Vac input. |
| Protection | OVP/UVP/OCP/OPP/OTP/SCP |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 10A Max. |
| Output | +3.3V@20A, +5V@20A, [email protected] , [email protected] , +5VSB@3A |
| MTBF | >100,000 Hours |
| Approvals | CE/UKCA/ICES/TUV/LVD/RCM/CB/FCC/cTUVus/BSMI/CCC/BIS/S-MARK |
| Connectors | 1 x 12VHPWR (12+4) PCIe / 1 x 24 pin (20+4) ATX / 4 x 4 pin Peripheral / 4 x 8 pin (6+2) PCIe |
| Cable Spec | 1 x Main Power (24Pin) x1 550mm 2 x ATX 12V(4+4Pin) x1 700mm 2 x PCIe(6+2Pin) x2 600mm+150mm 1 x PCIe(12+4Pin) 600W x1 600mm 2 x SATA (5Pin) x3 450mm+150mm+150mm 1 x Peripheral (4Pin) x4 400mm+150mm+150mm+150mm |
| Dimensions | 150 x 86 x140mm |
| Peso di spedizione | 1.13 kg |
| Dimensioni del pacco | 279 × 216 × 123 mm |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The native 12VHPWR (12+4) PCIe connector is rated for 450 W and complies with the ATX 3.1 power excursion requirements for modern graphics cards.
At 140 mm long and 150 x 86 mm wide, it matches the typical ATX form factor used in most mid-tower chassis.
Push the 12+4 pin connector straight in until the latch clicks; the 600 mm cable reaches most GPU positions without sharp bends.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?