Thermaltake
Thermaltake UX150 ARGB CPU Cooler CL-P146-CA13SW-A 130mm 130W Black
A 130 mm PWM fan with ARGB infinity-mirror lighting cools CPUs up to 130 W TDP on Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 sockets
- Fan Size130mm
- Bearing TypeHydraulic
- TypeHeatsinks only
- RPM500~2400RPM
- LEDARGB
- Air Flow59.2 CFM
- Low-profile 73 mm height fits compact SFF builds
- Hydraulic bearing runs quietly at 30-35 dBA under load
- Infinity mirror centre hub adds layered ARGB lighting
- 130W TDP capacity handles mid-range Intel CPUs
- 130 mm fan delivers 59.2 CFM airflow at 2400 RPM
Compact 73 mm air cooler for Intel sockets
The Thermaltake UX150 ARGB is a low-profile CPU air cooler standing 73 mm tall. It fits Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 platforms. A copper base and aluminum fins pair with a 130 mm hydraulic-bearing fan spinning between 500 and 2400 RPM. Rated at 130 W TDP, it suits small-form-factor or full-size builds where height clearance is limited.
Replaces tall tower coolers when clearance is tight
Builders moving from a bulky tower cooler gain case compatibility without changing socket hardware. The horizontal fan mount and non-interference design keep memory slots free, so existing RAM kits stay installed. The jump is worth it when a chassis cannot accept coolers taller than 73 mm or when an infinity-mirror ARGB centre hub is preferred over plain lighting.
130 W headroom with 59.2 CFM airflow
At full speed the fan delivers 59.2 CFM and 2.9 mm-H2O static pressure at 30 to 35 dBA. This comfortably handles mid-range Intel CPUs running near the 130 W rating. Headroom runs out with sustained loads above that figure or in enclosures with restricted front-to-rear airflow, where a larger radiator or higher-pressure fan would be required.
Kohokohdat
- Low-profile 73 mm height fits compact SFF builds
- Hydraulic bearing runs quietly at 30-35 dBA under load
- Infinity mirror centre hub adds layered ARGB lighting
- 130W TDP capacity handles mid-range Intel CPUs
- 130 mm fan delivers 59.2 CFM airflow at 2400 RPM
Tekniset tiedot
| Brand | Thermaltake |
|---|---|
| Model | CL-P146-CA13SW-A |
| Fan Size | 130mm |
| Bearing Type | Hydraulic |
| Type | Heatsinks only |
| RPM | 500~2400RPM |
| LED | ARGB |
| Air Flow | 59.2 CFM |
| Noise Level | 30-35 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Heatsink Material | Aluminum & Copper |
| CPU Socket Compatibility | Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 1851 |
| TDP | 130W |
| Pressure | Static Pressur: 2.9 mm-H2O |
| Fan Mounting Types to Heatsink | Horizontal |
| Max CPU Cooler Height | 73 mm |
| Fan Dimensions | 130 x 130 x 39 mm(L x W x H) |
| Weight | 1.2 lbs. |
| Lähetyspaino | 0.52 kg |
| Pakkauksen mitat | 132 × 132 × 114 mm |
Kysymyksiä tästä tuotteesta
What maximum cooler height does the 73 mm UX150 ARGB require the case to clear?
The cooler stands 73 mm tall, so the case must provide at least that much clearance between the motherboard and the side panel.
How do I mount the cooler on an Intel LGA 1700 socket, and which step is often missed?
Use the supplied LGA 1700 backplate and standoffs, then secure the mounting brackets before placing the heatsink; the step often missed is tightening the backplate screws evenly before adding the fan.
When should I replace the 130 mm hydraulic-bearing fan?
Replace the fan if noise rises above the rated 30 to 35 dBA or if RPM drops below the 500 to 2400 range, indicating bearing wear.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001045BTC
Varastossa