Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Thermaltake
A 130 mm PWM fan with ARGB infinity-mirror lighting cools CPUs up to 130 W TDP on Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 sockets
The Thermaltake UX150 ARGB is a low-profile CPU air cooler standing 73 mm tall. It fits Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 platforms. A copper base and aluminum fins pair with a 130 mm hydraulic-bearing fan spinning between 500 and 2400 RPM. Rated at 130 W TDP, it suits small-form-factor or full-size builds where height clearance is limited.
Builders moving from a bulky tower cooler gain case compatibility without changing socket hardware. The horizontal fan mount and non-interference design keep memory slots free, so existing RAM kits stay installed. The jump is worth it when a chassis cannot accept coolers taller than 73 mm or when an infinity-mirror ARGB centre hub is preferred over plain lighting.
At full speed the fan delivers 59.2 CFM and 2.9 mm-H2O static pressure at 30 to 35 dBA. This comfortably handles mid-range Intel CPUs running near the 130 W rating. Headroom runs out with sustained loads above that figure or in enclosures with restricted front-to-rear airflow, where a larger radiator or higher-pressure fan would be required.
| Brand | Thermaltake |
|---|---|
| Model | CL-P146-CA13SW-A |
| Fan Size | 130mm |
| Bearing Type | Hydraulic |
| Type | Heatsinks only |
| RPM | 500~2400RPM |
| LED | ARGB |
| Air Flow | 59.2 CFM |
| Noise Level | 30-35 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| Heatsink Material | Aluminum & Copper |
| CPU Socket Compatibility | Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 1851 |
| TDP | 130W |
| Pressure | Static Pressur: 2.9 mm-H2O |
| Fan Mounting Types to Heatsink | Horizontal |
| Max CPU Cooler Height | 73 mm |
| Fan Dimensions | 130 x 130 x 39 mm(L x W x H) |
| Weight | 1.2 lbs. |
| Verzendgewicht | 0.52 kg |
| Pakketafmetingen | 132 × 132 × 114 mm |
The cooler stands 73 mm tall, so the case must provide at least that much clearance between the motherboard and the side panel.
Use the supplied LGA 1700 backplate and standoffs, then secure the mounting brackets before placing the heatsink; the step often missed is tightening the backplate screws evenly before adding the fan.
Replace the fan if noise rises above the rated 30 to 35 dBA or if RPM drops below the 500 to 2400 range, indicating bearing wear.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?