Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black CPU air cooler with 130mm ARGB fan, copper base, aluminium fins, infinity mirror centre, 73mm tall

Thermaltake

Thermaltake UX150 ARGB CPU Cooler CL-P146-CA13SW-A 130mm 130W Black

SKU CH-2WKN-F5FYY MPN CL-P146-CA13SW-A

A 130 mm PWM fan with ARGB infinity-mirror lighting cools CPUs up to 130 W TDP on Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 sockets

  • Fan Size130mm
  • Bearing TypeHydraulic
  • TypeHeatsinks only
  • RPM500~2400RPM
  • LEDARGB
  • Air Flow59.2 CFM
  • Low-profile 73 mm height fits compact SFF builds
  • Hydraulic bearing runs quietly at 30-35 dBA under load
  • Infinity mirror centre hub adds layered ARGB lighting
  • 130W TDP capacity handles mid-range Intel CPUs
  • 130 mm fan delivers 59.2 CFM airflow at 2400 RPM

Compact 73 mm air cooler for Intel sockets

The Thermaltake UX150 ARGB is a low-profile CPU air cooler standing 73 mm tall. It fits Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 platforms. A copper base and aluminum fins pair with a 130 mm hydraulic-bearing fan spinning between 500 and 2400 RPM. Rated at 130 W TDP, it suits small-form-factor or full-size builds where height clearance is limited.

Replaces tall tower coolers when clearance is tight

Builders moving from a bulky tower cooler gain case compatibility without changing socket hardware. The horizontal fan mount and non-interference design keep memory slots free, so existing RAM kits stay installed. The jump is worth it when a chassis cannot accept coolers taller than 73 mm or when an infinity-mirror ARGB centre hub is preferred over plain lighting.

130 W headroom with 59.2 CFM airflow

At full speed the fan delivers 59.2 CFM and 2.9 mm-H2O static pressure at 30 to 35 dBA. This comfortably handles mid-range Intel CPUs running near the 130 W rating. Headroom runs out with sustained loads above that figure or in enclosures with restricted front-to-rear airflow, where a larger radiator or higher-pressure fan would be required.

Pontos fortes

  • Low-profile 73 mm height fits compact SFF builds
  • Hydraulic bearing runs quietly at 30-35 dBA under load
  • Infinity mirror centre hub adds layered ARGB lighting
  • 130W TDP capacity handles mid-range Intel CPUs
  • 130 mm fan delivers 59.2 CFM airflow at 2400 RPM

Especificações

BrandThermaltake
ModelCL-P146-CA13SW-A
Fan Size130mm
Bearing TypeHydraulic
TypeHeatsinks only
RPM500~2400RPM
LEDARGB
Air Flow59.2 CFM
Noise Level30-35 dBA
Power Connector3 Pin
ColorBlack
Heatsink MaterialAluminum & Copper
CPU Socket CompatibilityIntel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 1851
TDP130W
PressureStatic Pressur: 2.9 mm-H2O
Fan Mounting Types to HeatsinkHorizontal
Max CPU Cooler Height73 mm
Fan Dimensions130 x 130 x 39 mm(L x W x H)
Weight1.2 lbs.
Peso de envio0.52 kg
Dimensões da embalagem132 × 132 × 114 mm

Perguntas sobre este artigo

What maximum cooler height does the 73 mm UX150 ARGB require the case to clear?

The cooler stands 73 mm tall, so the case must provide at least that much clearance between the motherboard and the side panel.

How do I mount the cooler on an Intel LGA 1700 socket, and which step is often missed?

Use the supplied LGA 1700 backplate and standoffs, then secure the mounting brackets before placing the heatsink; the step often missed is tightening the backplate screws evenly before adding the fan.

When should I replace the 130 mm hydraulic-bearing fan?

Replace the fan if noise rises above the rated 30 to 35 dBA or if RPM drops below the 500 to 2400 range, indicating bearing wear.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.