저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black CPU air cooler with 130mm ARGB fan, copper base, aluminium fins, infinity mirror centre, 73mm tall

Thermaltake

Thermaltake UX150 ARGB CPU Cooler CL-P146-CA13SW-A 130mm 130W Black

SKU CH-2WKN-F5FYY MPN CL-P146-CA13SW-A

A 130 mm PWM fan with ARGB infinity-mirror lighting cools CPUs up to 130 W TDP on Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 sockets

  • Fan Size130mm
  • Bearing TypeHydraulic
  • TypeHeatsinks only
  • RPM500~2400RPM
  • LEDARGB
  • Air Flow59.2 CFM
  • Low-profile 73 mm height fits compact SFF builds
  • Hydraulic bearing runs quietly at 30-35 dBA under load
  • Infinity mirror centre hub adds layered ARGB lighting
  • 130W TDP capacity handles mid-range Intel CPUs
  • 130 mm fan delivers 59.2 CFM airflow at 2400 RPM

Compact 73 mm air cooler for Intel sockets

The Thermaltake UX150 ARGB is a low-profile CPU air cooler standing 73 mm tall. It fits Intel LGA 1851, 1700, 1200, 1156, 1155, 1151 and 1150 platforms. A copper base and aluminum fins pair with a 130 mm hydraulic-bearing fan spinning between 500 and 2400 RPM. Rated at 130 W TDP, it suits small-form-factor or full-size builds where height clearance is limited.

Replaces tall tower coolers when clearance is tight

Builders moving from a bulky tower cooler gain case compatibility without changing socket hardware. The horizontal fan mount and non-interference design keep memory slots free, so existing RAM kits stay installed. The jump is worth it when a chassis cannot accept coolers taller than 73 mm or when an infinity-mirror ARGB centre hub is preferred over plain lighting.

130 W headroom with 59.2 CFM airflow

At full speed the fan delivers 59.2 CFM and 2.9 mm-H2O static pressure at 30 to 35 dBA. This comfortably handles mid-range Intel CPUs running near the 130 W rating. Headroom runs out with sustained loads above that figure or in enclosures with restricted front-to-rear airflow, where a larger radiator or higher-pressure fan would be required.

주요 특징

  • Low-profile 73 mm height fits compact SFF builds
  • Hydraulic bearing runs quietly at 30-35 dBA under load
  • Infinity mirror centre hub adds layered ARGB lighting
  • 130W TDP capacity handles mid-range Intel CPUs
  • 130 mm fan delivers 59.2 CFM airflow at 2400 RPM

사양

BrandThermaltake
ModelCL-P146-CA13SW-A
Fan Size130mm
Bearing TypeHydraulic
TypeHeatsinks only
RPM500~2400RPM
LEDARGB
Air Flow59.2 CFM
Noise Level30-35 dBA
Power Connector3 Pin
ColorBlack
Heatsink MaterialAluminum & Copper
CPU Socket CompatibilityIntel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 1851
TDP130W
PressureStatic Pressur: 2.9 mm-H2O
Fan Mounting Types to HeatsinkHorizontal
Max CPU Cooler Height73 mm
Fan Dimensions130 x 130 x 39 mm(L x W x H)
Weight1.2 lbs.
배송 무게0.52 kg
포장 크기132 × 132 × 114 mm

이 상품에 대한 질문

What maximum cooler height does the 73 mm UX150 ARGB require the case to clear?

The cooler stands 73 mm tall, so the case must provide at least that much clearance between the motherboard and the side panel.

How do I mount the cooler on an Intel LGA 1700 socket, and which step is often missed?

Use the supplied LGA 1700 backplate and standoffs, then secure the mounting brackets before placing the heatsink; the step often missed is tightening the backplate screws evenly before adding the fan.

When should I replace the 130 mm hydraulic-bearing fan?

Replace the fan if noise rises above the rated 30 to 35 dBA or if RPM drops below the 500 to 2400 range, indicating bearing wear.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.