SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Western Digital
A 20 TB 3.5-inch internal hard drive with 7200 RPM and a 12Gb/s SAS interface for high-capacity storage
The Western Digital Ultrastar DC HC560 is a 20TB 3.5-inch hard drive built for data-centre arrays that need high capacity in a standard form factor. It targets operators running dense storage clusters, backup repositories or cold-tier archives where cost per terabyte matters more than latency. Buyers needing low-latency transaction logs or boot volumes should consider solid-state alternatives.
The drive connects through a 12Gb/s SAS interface, which caps sustained throughput at the link rate and shares bandwidth across expander topologies. Rotational speed is fixed at 7200 RPM, so random IOPS and access latency remain bounded by mechanical physics. Workloads demanding consistent sub-millisecond response or saturation of multiple 12Gb/s lanes will exceed what the spindle can deliver.
OptiNAND technology adds embedded flash to offload metadata and improve write efficiency, letting the 20TB platter set absorb bursty ingest and rebuild traffic more smoothly. Sequential workloads such as backup streams or media archives fit comfortably within the available space. Extremely write-intensive, small-block workloads or deployments requiring multiple drive failures worth of spare capacity will exhaust the usable headroom faster.
| Brand | Western Digital |
|---|---|
| Series | Ultrastar DC HC560 |
| Model | WUH722020BL5204 |
| Part Number | 0F38652 |
| Interface | 12Gb/s SAS |
| Capacity | 20TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
| Lähetyspaino | 0.73 kg |
| Pakkauksen mitat | 152 × 102 × 51 mm |
Choose the 20TB model when you need maximum density per 3.5" bay; the 7200 RPM spindle and 12Gb/s SAS interface keep throughput high even at full capacity.
It provides consistent rotational latency for mixed read-write workloads, letting the 20TB platters sustain high sequential transfer rates across the 12Gb/s SAS link.
The dual-port 12Gb/s SAS connection allows full-duplex traffic and multipath redundancy, so the drive can push sustained bandwidth without the interface capping performance.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?