SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Western Digital
A 20 TB 3.5-inch internal hard drive with 7200 RPM and a 12Gb/s SAS interface for high-capacity storage
The Western Digital Ultrastar DC HC560 is a 20TB 3.5-inch hard drive built for data-centre arrays that need high capacity in a standard form factor. It targets operators running dense storage clusters, backup repositories or cold-tier archives where cost per terabyte matters more than latency. Buyers needing low-latency transaction logs or boot volumes should consider solid-state alternatives.
The drive connects through a 12Gb/s SAS interface, which caps sustained throughput at the link rate and shares bandwidth across expander topologies. Rotational speed is fixed at 7200 RPM, so random IOPS and access latency remain bounded by mechanical physics. Workloads demanding consistent sub-millisecond response or saturation of multiple 12Gb/s lanes will exceed what the spindle can deliver.
OptiNAND technology adds embedded flash to offload metadata and improve write efficiency, letting the 20TB platter set absorb bursty ingest and rebuild traffic more smoothly. Sequential workloads such as backup streams or media archives fit comfortably within the available space. Extremely write-intensive, small-block workloads or deployments requiring multiple drive failures worth of spare capacity will exhaust the usable headroom faster.
| Brand | Western Digital |
|---|---|
| Series | Ultrastar DC HC560 |
| Model | WUH722020BL5204 |
| Part Number | 0F38652 |
| Interface | 12Gb/s SAS |
| Capacity | 20TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
| وزن الشحنة | 0.73 kg |
| أبعاد الطرد | 152 × 102 × 51 mm |
Choose the 20TB model when you need maximum density per 3.5" bay; the 7200 RPM spindle and 12Gb/s SAS interface keep throughput high even at full capacity.
It provides consistent rotational latency for mixed read-write workloads, letting the 20TB platters sustain high sequential transfer rates across the 12Gb/s SAS link.
The dual-port 12Gb/s SAS connection allows full-duplex traffic and multipath redundancy, so the drive can push sustained bandwidth without the interface capping performance.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟