SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Western Digital
A 20 TB 3.5-inch internal hard drive with 7200 RPM and a 12Gb/s SAS interface for high-capacity storage
The Western Digital Ultrastar DC HC560 is a 20TB 3.5-inch hard drive built for data-centre arrays that need high capacity in a standard form factor. It targets operators running dense storage clusters, backup repositories or cold-tier archives where cost per terabyte matters more than latency. Buyers needing low-latency transaction logs or boot volumes should consider solid-state alternatives.
The drive connects through a 12Gb/s SAS interface, which caps sustained throughput at the link rate and shares bandwidth across expander topologies. Rotational speed is fixed at 7200 RPM, so random IOPS and access latency remain bounded by mechanical physics. Workloads demanding consistent sub-millisecond response or saturation of multiple 12Gb/s lanes will exceed what the spindle can deliver.
OptiNAND technology adds embedded flash to offload metadata and improve write efficiency, letting the 20TB platter set absorb bursty ingest and rebuild traffic more smoothly. Sequential workloads such as backup streams or media archives fit comfortably within the available space. Extremely write-intensive, small-block workloads or deployments requiring multiple drive failures worth of spare capacity will exhaust the usable headroom faster.
| Brand | Western Digital |
|---|---|
| Series | Ultrastar DC HC560 |
| Model | WUH722020BL5204 |
| Part Number | 0F38652 |
| Interface | 12Gb/s SAS |
| Capacity | 20TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
| Prepravná hmotnosť | 0.73 kg |
| Rozmery balenia | 152 × 102 × 51 mm |
Choose the 20TB model when you need maximum density per 3.5" bay; the 7200 RPM spindle and 12Gb/s SAS interface keep throughput high even at full capacity.
It provides consistent rotational latency for mixed read-write workloads, letting the 20TB platters sustain high sequential transfer rates across the 12Gb/s SAS link.
The dual-port 12Gb/s SAS connection allows full-duplex traffic and multipath redundancy, so the drive can push sustained bandwidth without the interface capping performance.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?