Western Digital WD RE4 WD5003ABYX 500GB 7200 RPM 64MB SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Western Digital
A 250 GB 3.5" SATA drive spinning at 7200 RPM with 64 MB cache, built for 24×7 RAID arrays
The Western Digital WD RE4 WD2503ABYX is a 250GB 3.5-inch internal hard drive built for servers and high-availability deployments. It runs at 7200 RPM with a 64MB cache and a SATA 3.0Gb/s interface. The drive is rated for 1.2 million hours at 100% duty cycle and 24x7x365 operation.
Supplied as a bare drive without tray or mounting hardware, it fits standard 3.5-inch bays and connects via a single SATA data and power cable. Firmware includes time-limited error recovery (TLER) and NoTouch ramp load technology to protect the heads during continuous operation. These features suit RAID arrays and heavy application workloads.
Designed for non-stop use, the drive maintains stable temperatures in ventilated server chassis under constant load. Mechanical noise is typical for a 7200 RPM enterprise spindle and remains consistent over long periods. Power draw scales with the SATA 3.0Gb/s interface during sustained read and write activity.
| Brand | Western Digital |
|---|---|
| Series | WD RE4 |
| Model | WD2503ABYX |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 250GB |
| NAND Flash Memory Type | Enterprise |
| RPM | 7200 RPM |
| Cache | 64MB |
| Average Latency | 3Gb/s |
| Features | RAID-specific, time-limited error recovery (TLER) 1.2 million hours at 100% duty cycle NoTouch ramp load technology 24x7 reliability |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| Lähetyspaino | 0.59 kg |
| Pakkauksen mitat | 147 × 102 × 23 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The SATA 3.0 Gb/s link caps sustained transfer at the interface maximum, so the 7200 RPM platters and 64MB cache cannot push data faster than the bus allows.
The drive needs a standard 3.5-inch bay with SATA data and power connectors; it fits any desktop chassis or server tray designed for that form factor.
Secure the drive with four screws, attach the SATA data cable to the motherboard and the power cable from the PSU, then enable the port in BIOS so the OS can detect it.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?