Western Digital WD RE4 WD5003ABYX 500GB 7200 RPM 64MB SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Western Digital
A 250 GB 3.5" SATA drive spinning at 7200 RPM with 64 MB cache, built for 24×7 RAID arrays
The Western Digital WD RE4 WD2503ABYX is a 250GB 3.5-inch internal hard drive built for servers and high-availability deployments. It runs at 7200 RPM with a 64MB cache and a SATA 3.0Gb/s interface. The drive is rated for 1.2 million hours at 100% duty cycle and 24x7x365 operation.
Supplied as a bare drive without tray or mounting hardware, it fits standard 3.5-inch bays and connects via a single SATA data and power cable. Firmware includes time-limited error recovery (TLER) and NoTouch ramp load technology to protect the heads during continuous operation. These features suit RAID arrays and heavy application workloads.
Designed for non-stop use, the drive maintains stable temperatures in ventilated server chassis under constant load. Mechanical noise is typical for a 7200 RPM enterprise spindle and remains consistent over long periods. Power draw scales with the SATA 3.0Gb/s interface during sustained read and write activity.
| Brand | Western Digital |
|---|---|
| Series | WD RE4 |
| Model | WD2503ABYX |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 250GB |
| NAND Flash Memory Type | Enterprise |
| RPM | 7200 RPM |
| Cache | 64MB |
| Average Latency | 3Gb/s |
| Features | RAID-specific, time-limited error recovery (TLER) 1.2 million hours at 100% duty cycle NoTouch ramp load technology 24x7 reliability |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| น้ำหนักในการจัดส่ง | 0.59 kg |
| ขนาดบรรจุภัณฑ์ | 147 × 102 × 23 mm |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The SATA 3.0 Gb/s link caps sustained transfer at the interface maximum, so the 7200 RPM platters and 64MB cache cannot push data faster than the bus allows.
The drive needs a standard 3.5-inch bay with SATA data and power connectors; it fits any desktop chassis or server tray designed for that form factor.
Secure the drive with four screws, attach the SATA data cable to the motherboard and the power cable from the PSU, then enable the port in BIOS so the OS can detect it.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม