Western Digital WD RE4 WD5003ABYX 500GB 7200 RPM 64MB SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Western Digital
A 250 GB 3.5" SATA drive spinning at 7200 RPM with 64 MB cache, built for 24×7 RAID arrays
The Western Digital WD RE4 WD2503ABYX is a 250GB 3.5-inch internal hard drive built for servers and high-availability deployments. It runs at 7200 RPM with a 64MB cache and a SATA 3.0Gb/s interface. The drive is rated for 1.2 million hours at 100% duty cycle and 24x7x365 operation.
Supplied as a bare drive without tray or mounting hardware, it fits standard 3.5-inch bays and connects via a single SATA data and power cable. Firmware includes time-limited error recovery (TLER) and NoTouch ramp load technology to protect the heads during continuous operation. These features suit RAID arrays and heavy application workloads.
Designed for non-stop use, the drive maintains stable temperatures in ventilated server chassis under constant load. Mechanical noise is typical for a 7200 RPM enterprise spindle and remains consistent over long periods. Power draw scales with the SATA 3.0Gb/s interface during sustained read and write activity.
| Brand | Western Digital |
|---|---|
| Series | WD RE4 |
| Model | WD2503ABYX |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 250GB |
| NAND Flash Memory Type | Enterprise |
| RPM | 7200 RPM |
| Cache | 64MB |
| Average Latency | 3Gb/s |
| Features | RAID-specific, time-limited error recovery (TLER) 1.2 million hours at 100% duty cycle NoTouch ramp load technology 24x7 reliability |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| وزن الشحنة | 0.59 kg |
| أبعاد الطرد | 147 × 102 × 23 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The SATA 3.0 Gb/s link caps sustained transfer at the interface maximum, so the 7200 RPM platters and 64MB cache cannot push data faster than the bus allows.
The drive needs a standard 3.5-inch bay with SATA data and power connectors; it fits any desktop chassis or server tray designed for that form factor.
Secure the drive with four screws, attach the SATA data cable to the motherboard and the power cable from the PSU, then enable the port in BIOS so the OS can detect it.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟