NEMIX RAM 64GB DDR4 3200 4Rx4 1.2V 288-PIN ECC LRDIMM server RAM
- DDR4 3200 (PC4 2560…
- 22
Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.
A-Tech
16GB DDR3-1066 ECC registered DIMM with 4Rx4 organisation and 1.5V operation for HP 501538-001 and 593915-S21 servers
This A-Tech module delivers 16GB of DDR3 1066MHz PC3-8500 ECC RDIMM capacity for server and workstation systems. It uses a 240-pin DIMM form factor with a 4Rx4 rank configuration and major brand chips. The module operates at standard 1.5V DDR3 voltage with CL7 latency. It serves as a direct replacement for HP part numbers 501538-001 and 593915-S21.
Registered DDR3 modules at 1.5V draw modest power and run cool inside adequately ventilated server chassis. The ECC and registered design adds minimal overhead compared to unbuffered memory. Noise remains dependent on system fans rather than the memory itself. No additional cooling beyond standard airflow is required for typical workloads.
The combination of ECC error correction and registered buffering is the specification that determines suitability for mission-critical servers. This module provides both features to protect against data corruption and reduce electrical load on the memory controller. Systems requiring non-ECC or unbuffered memory cannot use this part. Verify your platform supports ECC RDIMM before purchase.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Power down the server, open the chassis, align the notch on the 240-pin DDR3 module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 16GB registered ECC module is recognised at 1066MHz.
No scheduled maintenance is required; the module uses major-brand chips tested for reliability. Replace only if memory diagnostics report correctable ECC errors that exceed the platform threshold or if a capacity upgrade is needed.
The registered buffer and ECC logic add one cycle of latency, so the practical ceiling is the DDR3 1066MHz bus speed and CL7 timing; sustained throughput cannot exceed the PC3-8500 bandwidth rating.
Également dans ce rayon
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Ce que vous envoyez, et ce dans quoi vous lisez les prix.
Envoyé depuis votre portefeuille à la caisse
Affichage seul — le catalogue est libellé en dollars
Aucune monnaie ne correspond.
Choisissez la langue dans laquelle le site vous parle.
Première visite ?
Vous avez déjà un compte ?
Il n’y a pas de réinitialisation automatique : cette boutique n’envoie aucun e-mail, il n’existe donc aucun lien à usage unique à demander. Laissez l’adresse sur le compte, elle sera traitée à la main.
Demande enregistrée
Rien n’arrivera dans votre boîte de réception — cette boutique n’envoie aucun e-mail. Quelqu’un s’en occupe à la main.
Vous l’avez retrouvé ?