A-Tech
A-Tech 16GB DDR4 2133 PC4-17000 2Rx8 Desktop RAM
A 16GB DDR4 2133MHz PC4-17000 unbuffered DIMM module for desktop memory upgrades
- Capacity16GB
- SpeedDDR4 2133 (PC4 17000)
- Tested Frequency2133
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- Boosts multitasking with a 16 GB DDR4 module
- Runs at 2133 MHz PC4-17000 for responsive performance
- Standard 1.2 V DDR4 voltage keeps power draw low
- 288-pin DIMM fits desktop motherboards directly
- Non-ECC unbuffered design works with AMD and Intel systems
16GB DDR4 2133 Desktop Module
This A-Tech module provides 16GB of DDR4 memory at 2133MHz for desktop computers. It uses the standard 288-pin DIMM form factor and operates at 1.2V. The unbuffered, non-ECC design fits mainstream consumer motherboards.
Suits AMD and Intel desktop upgrades.
Builders replacing Samsung M378A2K43BB1-CPB or M378A2K43CB1-CPB modules will find a direct match. Systems requiring ECC error correction or registered buffering must choose a different module type. Laptop or small-form-factor boards using SO-DIMMs cannot accept this DIMM.
Speed and density decide compatibility
The module runs at DDR4 2133 (PC4-17000) with a 2Rx8 organisation. Verify that your motherboard supports this frequency and density before purchase. A mismatch in speed rank or voltage will prevent the system from booting.
Points forts
- Boosts multitasking with a 16 GB DDR4 module
- Runs at 2133 MHz PC4-17000 for responsive performance
- Standard 1.2 V DDR4 voltage keeps power draw low
- 288-pin DIMM fits desktop motherboards directly
- Non-ECC unbuffered design works with AMD and Intel systems
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will this module work in a motherboard with four DIMM slots?
Yes, the 288‑pin DDR4 DIMM fits any desktop board that accepts DDR4 2133 memory; populate the slot recommended by the motherboard manual for single‑module operation.
Is the 1.20 V voltage compatible with standard desktop platforms?
The module runs at the DDR4 standard 1.20 V, so it works with any desktop CPU and chipset that supports DDR4 without requiring manual voltage changes.
Can I use this stick to replace a Samsung M378A2K43BB1‑CPB module?
This A‑Tech part is listed as a direct replacement for Samsung M378A2K43BB1‑CPB and M378A2K43CB1‑CPB, matching capacity, speed, rank and voltage.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



