Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green bare circuit board with black memory chips on both sides gold edge connector no heat spreader

A-Tech

A-Tech 16GB DDR4 2133MHz CL15 1.20V Desktop RAM

SKU CH-DD2W-993J8

16GB DDR4 2133MHz CL15 desktop DIMM replaces Corsair CMK32GX4M2A2133C13 modules

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity handles heavier multitasking loads
  • 2133 MHz DDR4 speed moves data at PC4-17000 rates
  • CL15 latency keeps response tight
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM fits common desktop slots

Compatible 16GB DDR4 Module

This 16GB DDR4 2133MHz CL15 module is built as a compatible replacement for the Corsair CMK32GX4M2A2133C13 kit. It runs at the standard 1.20V DDR4 voltage and uses an unbuffered non-ECC design. The single DIMM targets desktop owners who need a straightforward capacity increase.

Verify DDR4 DIMM Slot and Speed Support

Confirm that your motherboard accepts DDR4 288-pin DIMMs and can operate memory at 2133MHz. Check the board manual for maximum per-slot capacity and whether it requires specific rank configurations such as 2Rx8. Ensure the BIOS is current enough to recognise the module at its rated CL15 timing.

Suits Standard Desktop Upgrades Not Laptops

This module suits typical desktop towers and workstations that use regular DDR4 DIMM slots and do not demand ECC or registered memory. It will not fit laptops or small-form-factor boards that require SO-DIMMs. Systems needing ECC error correction or quad-channel kits should look at different parts.

Points forts

  • 16 GB capacity handles heavier multitasking loads
  • 2133 MHz DDR4 speed moves data at PC4-17000 rates
  • CL15 latency keeps response tight
  • 20 V operation matches standard DDR4 voltage
  • 288-pin DIMM fits common desktop slots

Caractéristiques

BrandA-Tech
SeriesCompatible Replacement for Corsair
ModelCMK32GX4M2A2133C13
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesCMK32GX4M2A2133C13
Recommend UseCompatible Replacement for Corsair CMK32GX4M2A2133C13

Questions sur cet article

Will this single 16 GB module work in a motherboard that only supports 8 GB per slot?

The module is 16 GB; if your board limits each slot to 8 GB it will not be recognised. Check the motherboard manual for the maximum capacity per DIMM before buying.

My board lists DDR4-2133 CL13 — is CL15 compatible?

Yes. The memory will run at the motherboard's default settings, typically 2133 MHz with the looser CL15 timing, which is fully compatible.

Does the 262-pin figure mean this is a laptop SODIMM?

No. The physical module is a 288-pin desktop DIMM; the 262-pin reference in some data is an error. It fits standard desktop DDR4 slots only.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.