A-Tech
A-Tech 16GB DDR4 2133MHz PC4-17000 2Rx8 Desktop RAM
16 GB DDR4 desktop DIMM running at 2133 MHz with 1.20 V standard voltage and 288-pin unbuffered design
- Capacity16GB
- SpeedDDR4 2133 (PC4 17000)
- Tested Frequency2133
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- 16GB capacity for heavier multitasking and larger datasets
- 2133MHz DDR4 speed matches PC4-17000 system requirements
- 20V standard voltage reduces power draw and heat
- 288-pin unbuffered DIMM fits mainstream desktop slots
- Tested replacement for Hynix HMA82GU6AFR8N-TF and HMA82GU6MFR8N-TF
16GB DDR4 2133MHz desktop module
This single 16GB DDR4 module runs at 2133MHz with a standard 1.20V supply. It is an unbuffered, non-ECC DIMM built for desktop systems that accept DDR4 memory. The 2Rx8 organisation suits mainstream AMD and Intel platforms.
Capacity and headroom at 2133MHz
The 16GB capacity gives ample room for everyday multitasking, office suites and light content creation. Memory-intensive workloads such as large video projects or virtual-machine clusters will exhaust the single-module limit and require additional slots.
DDR4 288-pin interface limits
The DDR4 288-pin interface caps transfer rates at the rated 2133MHz (PC4-17000) bandwidth. Systems that demand higher frequencies or ECC error correction cannot use this module; a faster or registered kit would be required instead.
Points forts
- 16GB capacity for heavier multitasking and larger datasets
- 2133MHz DDR4 speed matches PC4-17000 system requirements
- 20V standard voltage reduces power draw and heat
- 288-pin unbuffered DIMM fits mainstream desktop slots
- Tested replacement for Hynix HMA82GU6AFR8N-TF and HMA82GU6MFR8N-TF
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will this 16 GB DDR4 2133 MHz module fit a desktop board that takes 288-pin DIMMs?
Yes, it is a standard 288-pin DDR4 UDIMM designed for desktop motherboards with DDR4 slots.
Can I mix this stick with existing memory running at 1.2 V?
The module operates at the standard DDR4 voltage of 1.2 V, so it will run at the same voltage as other DDR4 kits.
Is this a direct replacement for Hynix part numbers HMA82GU6AFR8N-TF and HMA82GU6MFR8N-TF?
The product is listed as a compatible replacement for both Hynix part numbers.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355155BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418643BTC
En stock