Micron Technology, Inc.
Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
$28.99
0.00037497BTC
En stock
A-Tech
A-Tech 16GB DDR4 2400 CL17 desktop RAM for Kingston HX424C15FB3/16 HX424C15FB3K2/32
16 GB DDR4 2400 CL17 desktop DIMM for Kingston HX424C15FB3/16 and KVR24N17D8/16 systems
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- Tested Frequency2400
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 16 GB single module doubles multitasking headroom for demanding workloads
- DDR4 2400 MHz CL17 timing delivers responsive data access at standard voltage
- 20 V DDR4 operation reduces power draw while maintaining stable performance
- 288-pin UDIMM form factor fits mainstream desktop motherboards without ECC overhead
- Tested compatible replacement for Kingston HX424C15FB3/16 and KVR24N17D8/16 part numbers
Capacity and compatibility
This 16GB DDR4 2400 module uses a 288-pin DIMM form factor and runs at 1.2V with a CL17 latency. It is an unbuffered non-ECC stick built with major-brand chips and tested at 2400 MT/s to meet PC4-19200 specifications. The single-module design adds 16GB in one slot.
Upgrade suitability
The kit suits owners of desktop boards that accept DDR4 2400 unbuffered memory and need a direct replacement for the listed Kingston part numbers. It will not fit laptops, servers requiring ECC or registered DIMMs, or systems limited to lower-density 8GB modules. Buyers should confirm their platform supports 16GB density before ordering.
Deciding specification
The critical figure is the 16GB density combined with DDR4 2400 CL17 timing at 1.2V on a 288-pin unbuffered DIMM. If the motherboard or CPU memory controller does not support 16GB single-rank or dual-rank modules at this speed and voltage the stick will not post. Match these exact parameters to the system documentation.
Points forts
- 16 GB single module doubles multitasking headroom for demanding workloads
- DDR4 2400 MHz CL17 timing delivers responsive data access at standard voltage
- 20 V DDR4 operation reduces power draw while maintaining stable performance
- 288-pin UDIMM form factor fits mainstream desktop motherboards without ECC overhead
- Tested compatible replacement for Kingston HX424C15FB3/16 and KVR24N17D8/16 part numbers
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will this 16 GB DDR4 2400 module fit my desktop DIMM slots?
Yes, it uses the standard 288-pin DDR4 DIMM form factor that fits any desktop motherboard with DDR4 slots.
Can I mix this CL17 stick with my existing CL15 Kingston modules?
The system will run all modules at the slowest common timing, so the CL15 sticks will drop to CL17.
Does this module require any special BIOS settings or voltage changes?
It operates at the standard 1.20 V DDR4 voltage and uses standard JEDEC timings, so no manual BIOS adjustment is needed.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Kingston Technology Corp.
Kingston Technology Corp. KTD-DM8400A/512 512MB DDR2 desktop RAM
- 512MB
- CL4
$12.99
0.00016802BTC
En stock
