A-Tech
A-Tech 16GB DDR4 2400MHz CL17 1Rx8 desktop RAM
A 16 GB DDR4 2400 MHz CL17 unbuffered DIMM for desktop memory upgrades
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- Tested Frequency2400
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 16 GB capacity lets you run more apps at once
- DDR4 2400 MHz speed moves data quickly through the system
- CL17 latency keeps response times tight
- 20 V operation reduces power draw and heat
- 288-pin DIMM fits standard desktop motherboard slots
16GB DDR4 2400MHz Desktop Module
This 16GB DDR4 DIMM runs at 2400MHz with CL17 latency and 1.20V operation. It uses a 1Rx8 unbuffered layout and major-brand chips on a 288-pin PCB. The module is built as a direct replacement for Kingston HX424C15FB4/16, HX424C15FB4K2/32 and HX424C15FB4K4/64 kits.
Replaces Slower or Smaller DDR4 Sticks
Swapping out 8GB or lower-speed DDR4 for this 16GB PC4-19200 unit adds capacity and bandwidth for multitasking. The jump is worth it when your board supports 2400MHz and you need a single-slot 16GB upgrade without ECC or registered buffers.
Suits Standard Desktop Builds
Ideal for AMD and Intel desktop systems that take non-ECC UDIMMs at 1.2V. Builders needing ECC, registered DIMMs, laptop SO-DIMMs or speeds above 2400MHz should look at other modules.
Points forts
- 16 GB capacity lets you run more apps at once
- DDR4 2400 MHz speed moves data quickly through the system
- CL17 latency keeps response times tight
- 20 V operation reduces power draw and heat
- 288-pin DIMM fits standard desktop motherboard slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Does this 288-pin DDR4 DIMM fit a standard desktop motherboard slot?
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by current desktop boards.
What is the correct way to seat the module so the 1.20V DDR4 2400MHz stick posts on first boot?
Align the notch with the slot key, press down firmly until both side clips click shut, then verify the BIOS shows 2400 MT/s.
When should I consider replacing this 16GB CL17 kit?
Replace it if memory diagnostics report errors, if the system becomes unstable under load, or if you need more than 16GB total capacity.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



