Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter

A-Tech

A-Tech 16GB DDR4 2400MHz ECC UDIMM 2Rx8 CL17 1.20V Server RAM

SKU CH-54S0-6FY8X

16 GB DDR4 ECC UDIMM running at 2400 MHz with CL17 latency for server upgrades

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 16GB capacity expands server memory for heavier workloads
  • DDR4 2400MHz speed delivers 19200 MT/s data rate
  • ECC UDIMM detects and corrects single-bit errors automatically
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 20V standard voltage reduces power draw and heat

16GB DDR4 2400MHz ECC UDIMM Server Memory

This 16GB DDR4 module operates at 2400MHz with CL17 latency and 1.20V standard voltage. It uses an unbuffered ECC UDIMM 2Rx8 configuration on a 288-pin form factor with major brand chipset components. The module serves as a direct replacement for specific Micron part numbers in server and workstation systems.

Suited for servers and workstations requiring ECC

Systems that require registered ECC modules cannot use this unbuffered design. Builders needing non-ECC memory for consumer platforms should select a different module. Buyers must verify their system specifications support DDR4 2400MHz ECC UDIMM memory before purchasing.

ECC UDIMM unbuffered design determines compatibility

The unbuffered ECC configuration is the critical specification that decides whether this module fits your system. Registered memory slots will not accept this UDIMM format. Confirm your motherboard or server documentation specifies support for ECC unbuffered DIMMs at 2400MHz.

Points forts

  • 16GB capacity expands server memory for heavier workloads
  • DDR4 2400MHz speed delivers 19200 MT/s data rate
  • ECC UDIMM detects and corrects single-bit errors automatically
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 20V standard voltage reduces power draw and heat

Caractéristiques

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions sur cet article

What motherboard slot and voltage does this 288‑pin DDR4 1.20V ECC UDIMM require?

The module fits a standard 288‑pin DDR4 DIMM slot and runs at the DDR4 standard voltage of 1.20V; the board must support unbuffered ECC memory.

Will this 2400MHz CL17 2Rx8 module run at its rated speed if the platform only supports lower DDR4 speeds?

The module will automatically down‑clock to the highest speed the platform allows while keeping CL17 timing at that lower frequency.

How can I confirm the 16GB ECC UDIMM is detected and error‑correcting after installation?

Check the BIOS or OS memory report for 16GB total capacity, 2400MHz (or the platform‑limited speed), ECC status enabled, and 2Rx8 organisation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.