A-Tech
A-Tech 16GB DDR5 4800 ECC SODIMM CL40 1.1V 1Rx8 262-Pin laptop RAM
16 GB DDR5 laptop memory with ECC error correction, 4800 MHz speed, CL40 latency and 1.1 V operation
- Capacity16GB
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- ECC protection guards data integrity in critical workloads
- DDR5 4800 speed moves data at PC5-38400 bandwidth
- Single-rank 1Rx8 layout simplifies memory controller scheduling
- JEDEC-standard 1.10 V reduces platform power draw
- 262-pin SO-DIMM fits DDR5 laptop and microserver slots
Purpose-built ECC upgrade
This 16 GB DDR5 SODIMM adds error-correcting memory to compatible microservers, mobile workstations and NAS servers. The single-rank module installs in a standard 262-pin slot and runs at the JEDEC-standard 1.1 V. Systems must explicitly support ECC unbuffered DDR5 SO-DIMMs for the module to function.
Thermals and power
Operating at the nominal DDR5 voltage of 1.1 V keeps power draw low and heat output minimal without a spreader. The unbuffered design avoids the extra electrical load of registered modules. Typical laptop and microserver cooling handles the thermal load silently under normal workloads.
Decisive spec
ECC unbuffered operation is the single specification that determines compatibility; the module will not work in platforms that require non-ECC or registered memory. Verify that your system lists DDR5 ECC SODIMM support before purchasing.
Points forts
- ECC protection guards data integrity in critical workloads
- DDR5 4800 speed moves data at PC5-38400 bandwidth
- Single-rank 1Rx8 layout simplifies memory controller scheduling
- JEDEC-standard 1.10 V reduces platform power draw
- 262-pin SO-DIMM fits DDR5 laptop and microserver slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR5 ECC SODIMM |
| Model | A-Tech 16GB 1Rx8 PC5-38400 ECC SODIMM |
| Part Number | NE-SS-0585 |
| Capacity | 16GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
Questions sur cet article
How do I install the 262-pin DDR5 SODIMM and what step do people get wrong?
Align the notch on the module with the slot key, insert at a slight angle, then press down evenly until the side clips click. The step often missed is pressing both ends simultaneously so the module seats fully in the 262-pin socket.
What maintenance or replacement will this 16GB ECC module need later?
No scheduled maintenance is required. If a memory error is logged, run a diagnostic to confirm the module is at fault, then replace the single 1Rx8 stick. Dust can be cleared with compressed air during routine system cleaning.
What limit appears first under sustained load with this CL40 1.1V module?
The JEDEC-standard 1.1V operating voltage and CL40 latency define the thermal and timing envelope. Under continuous heavy workloads the module will throttle to stay within its rated voltage and latency limits before any other constraint is reached.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



