Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green DDR3 ECC RDIMM sticks side by side

A-Tech

A-Tech 32GB (2x16GB) DDR3 1600 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM

SKU CH-6GX9-RXKHS

A 32 GB dual-channel kit of DDR3 1600 ECC registered DIMMs for servers and workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

Speed DDR3 1600 (PC3 12800)

  • ECC protection prevents data corruption in critical server workloads
  • Registered design stabilises signal integrity for reliable 24/7 operation
  • Dual-rank x4 organisation increases memory density per channel
  • 32 GB kit (2 × 16 GB) enables dual-channel bandwidth on compatible platforms
  • DDR3 1600 MHz at CL11 delivers responsive throughput for legacy enterprise systems

Server memory upgrade kit

This 32 GB kit contains two 16 GB DDR3 1600 MHz registered ECC DIMMs built for servers and workstations. The modules run at the standard 1.5 V and use a 240-pin form factor with dual-rank x4 organisation. They are not compatible with desktop or laptop platforms.

Sustained-load behaviour

Registered buffering and ECC correction keep data integrity intact during continuous multi-threaded workloads. The dual-channel kit allows the memory controller to interleave accesses across both modules for steadier throughput. CL11 latency at 1600 MHz supports predictable response times under heavy queue depths.

Thermals and power

Standard 1.5 V operation limits per-module power draw without requiring active cooling. Passive heat spreaders on the major-brand chips dissipate heat quietly in typical server airflow. The registered design adds minimal electrical load on the memory bus during normal use.

Points forts

  • ECC protection prevents data corruption in critical server workloads
  • Registered design stabilises signal integrity for reliable 24/7 operation
  • Dual-rank x4 organisation increases memory density per channel
  • 32 GB kit (2 × 16 GB) enables dual-channel bandwidth on compatible platforms
  • DDR3 1600 MHz at CL11 delivers responsive throughput for legacy enterprise systems

Caractéristiques

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 2Rx4 PC3-12800R
Capacity32GB (2 x 16GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

How much power does the 1.5 V DDR3 1600 kit draw under continuous server load?

Each module runs at the standard DDR3 voltage of 1.5 V; total draw depends on the platform's memory controller and how many ranks are active.

What must the system already support to accept these 240-pin registered ECC modules?

A DDR3 server or workstation motherboard with registered DIMM slots, ECC support, and a qualified memory list that includes 2Rx4 PC3-12800R modules.

Will the dual-rank x4 organisation work alongside older single-rank DDR3 RDIMMs in the same chassis?

Mixing ranks is platform-dependent; the motherboard's memory reference guide states which rank combinations are allowed per channel.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.