A-Tech
A-Tech 32GB DDR4 2933 DIMM 2Rx8 Desktop RAM
A 32 GB DDR4 2933 DIMM module for desktop upgrades, tested at 1.2 V and 288 pins
- Capacity32GB
- SpeedDDR4 2933 (PC4 23400)
- Tested Frequency2933
- Voltage1.20V
- ECCNo
- Buffered/RegisteredUnbuffered
- 32 GB capacity lets you run more applications at once
- DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive desktop use
- 20 V standard voltage keeps power draw low
- 288-pin DIMM form factor fits current desktop motherboards
- Non-ECC unbuffered design works with consumer AMD and Intel platforms
32GB DDR4 2933 DIMM for desktop upgrades
This single 32GB module runs at DDR4 2933 (PC4-23400) and fits standard 288-pin desktop slots. It targets users who need more capacity for multitasking, content work or virtual machines without populating multiple DIMM sockets.
Unbuffered non-ECC build with standard voltage
The stick uses 1.2V DDR4 standard voltage and an unbuffered non-ECC layout, so it drops into consumer AMD and Intel platforms that accept UDIMMs. The 2Rx8 organisation means the memory controller sees two ranks on one module, which can help bandwidth on dual-channel boards.
Low-voltage operation keeps thermals modest
At 1.2V the module draws little power and runs cool under normal desktop loads, so case airflow usually handles it without extra cooling. No fan or heatsink is required, leaving the DIMM silent in everyday use.
Points forts
- 32 GB capacity lets you run more applications at once
- DDR4 2933 MHz speed matches PC4-23400 bandwidth for responsive desktop use
- 20 V standard voltage keeps power draw low
- 288-pin DIMM form factor fits current desktop motherboards
- Non-ECC unbuffered design works with consumer AMD and Intel platforms
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2933 (PC4 23400) |
| Tested Frequency | 2933 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Does the DDR4 2933 module run at the standard 1.2V or does it need a higher voltage?
The module operates at 1.2V, which is the standard DDR4 voltage, so no manual voltage adjustment is required in the BIOS.
Will the 288-pin DIMM fit my motherboard's DDR4 slots?
Yes, it uses the standard 288-pin DDR4 DIMM form factor that matches every desktop DDR4 slot.
Do I need to enable XMP in the BIOS for this 2933MHz RAM to run at its rated speed?
The module is rated for 2933MHz at 1.2V; enable the appropriate memory profile in BIOS or set the frequency manually if the system defaults to a lower speed.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00353779BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00417022BTC
En stock