A-Tech
A-Tech 32GB DDR5 5600 Desktop RAM for Dell SNP8D9M0C/32G
A 32 GB DDR5 desktop DIMM running at 5600 MHz with CL40 latency and 1.1 V operation, built as a direct replacement for Dell SNP8D9M0C/32G
- Capacity32GB
- SpeedDDR5 5600 (PC5 44800)
- Tested Frequency5600
- CAS Latency40
- Voltage1.10V
- ECCNo
- 32 GB capacity expands multitasking headroom for demanding workloads
- DDR5 5600 speed accelerates data throughput for faster responsiveness
- 10 V operation reduces power draw while maintaining stability
- 288-pin DIMM form factor fits standard desktop memory slots
- CAS latency 40 delivers predictable timing for reliable performance
Compatible Dell Replacement
This 32GB DDR5 module is built as a direct replacement for the Dell SNP8D9M0C/32G part number. It fits desktop systems that require a 288-pin unbuffered DIMM running at the standard 1.10V voltage. The single stick delivers 32GB of capacity for memory-intensive workloads.
JEDEC Standard Operation
The memory operates at the JEDEC-defined DDR5 5600 speed with a CAS latency of 40 and requires no manual BIOS configuration to reach its rated frequency. Major brand DRAM IC chips are used throughout and every unit undergoes quality assurance testing before shipment. The green and black PCB carries no heat spreader, keeping the profile low for tight chassis clearances.
2Rx8 Dual-Rank Architecture
The module uses a 2Rx8 organisation, meaning it presents two ranks per channel for improved memory controller efficiency in compatible platforms. This rank structure is the key specification that determines whether the motherboard can populate all slots at the rated 5600 MT/s without downclocking. Buyers should verify their platform's rank support before ordering.
Points forts
- 32 GB capacity expands multitasking headroom for demanding workloads
- DDR5 5600 speed accelerates data throughput for faster responsiveness
- 10 V operation reduces power draw while maintaining stability
- 288-pin DIMM form factor fits standard desktop memory slots
- CAS latency 40 delivers predictable timing for reliable performance
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell SNP8D9M0C/32G |
| Model | A-Tech 32GB DDR5-5600 Desktop RAM Module |
| Capacity | 32GB |
| Speed | DDR5 5600 (PC5 44800) |
| Tested Frequency | 5600 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand DRAM IC Chips |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Dell SNP8D9M0C/32G |
Questions sur cet article
Will this single 32 GB module work in my Dell desktop that originally used the SNP8D9M0C/32G part?
Yes, it is built as a direct replacement for that Dell part number and uses the same DDR5 5600 specification.
My motherboard has four 288-pin slots; can I add a second identical module later for dual-channel operation?
Adding a second matching 32 GB module will enable dual-channel mode, provided your board supports it.
Does the 1.1 V operating voltage require any BIOS changes on a standard Dell desktop?
No, 1.1 V is the standard DDR5 voltage, so the system will configure it automatically.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355155BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418643BTC
En stock