Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green 240-pin DDR3L server DIMM with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1600 ECC RDIMM 2Rx8 1.35V Server Memory

SKU CH-9APJ-7PP4T

A 4GB DDR3L 1600 ECC registered DIMM running at 1.35V with a 2Rx8 layout for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • 35 V DDR3L operation reduces power draw and heat
  • 1600 MHz CL11 speed delivers responsive throughput for virtualisation
  • 240-pin DIMM form factor fits standard DDR3 server slots

Server memory for registered DDR3L slots

This 4 GB DDR3L 1600 ECC RDIMM is built for servers and workstations that require registered, error-correcting modules. It runs at 1.35 V and uses a 2Rx8 organisation with CL11 latency. The module fits 240-pin DDR3 DIMM sockets and replaces the Micron MT18KSF51272PDZ-1G6K1 part.

Tested replacement module

Each unit is validated as a compatible equivalent for the Micron MT18KSF51272PDZ-1G6K1 so it matches the original specifications. The low-voltage DDR3L design reduces power draw compared with standard 1.5 V DDR3 while keeping the same 1600 MHz speed. No extra software or accessories are included.

Straightforward DIMM installation

Insert the 240-pin module into an available registered DDR3 slot with the system powered off and the notch aligned. The most common issue is mixing registered and unbuffered DIMMs, which prevents the system from posting. Verify that your platform supports DDR3L 1.35 V registered ECC memory before purchase.

Points forts

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • 35 V DDR3L operation reduces power draw and heat
  • 1600 MHz CL11 speed delivers responsive throughput for virtualisation
  • 240-pin DIMM form factor fits standard DDR3 server slots

Caractéristiques

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF51272PDZ-1G6K1
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18KSF51272PDZ-1G6K1

Questions sur cet article

Will the registered ECC DIMM need any firmware updates or reconfiguration when I add it to an existing bank?

The module is a hardware replacement for Micron MT18KSF51272PDZ-1G6K1 and runs at standard DDR3L 1600 CL11; no firmware is required, only that the server supports registered ECC DDR3L.

What thermal or power ceiling will the 1.35 V registered module hit first during continuous server workloads?

At 1.35 V the DDR3L DIMM draws less power than standard DDR3, so the system memory-controller thermal limit is typically reached before the module itself overheats.

How much fan noise or extra heat should I expect from the 2Rx8 registered stick running 24/7?

Registered DDR3L at 1.35 V generates modest heat; in a properly ventilated chassis the module adds negligible noise and stays within normal server thermal envelopes.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.