A-Tech
A-Tech 4GB DDR4 2400MHz CL17 Crucial BLS4G4D240FSE BLS4K4G4D240FSE Desktop RAM
4GB DDR4 2400MHz CL17 desktop DIMM, 288-pin unbuffered non-ECC at 1.2V, tested for AMD and Intel systems
- Capacity4GB
- SpeedDDR4 2400 (PC4 19200)
- Tested Frequency2400
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 4GB capacity adds headroom for everyday multitasking
- DDR4 2400MHz speed moves data quickly through the system
- CL17 latency keeps response times tight
- 20V operation matches standard DDR4 voltage for broad compatibility
- 288-pin DIMM form factor fits standard desktop memory slots
4GB DDR4 2400MHz Desktop DIMM
This 4GB DDR4 module runs at 2400MHz with CL17 latency and 1.20V operation. It uses a standard 288-pin unbuffered DIMM form factor and non-ECC major-brand chips. The stick is built as a direct replacement for Crucial BLS4G4D240FSE and BLS4K4G4D240FSE part numbers.
Suitable for basic DDR4 desktop upgrades
It fits owners of AMD and Intel desktop boards that accept DDR4 2400MHz UDIMMs and need a single 4GB module to fill a free slot or replace a failed stick. Builders planning dual-channel kits, higher frequencies, ECC support or larger capacities per slot should choose a different product.
Speed and latency define the fit
The tested frequency is 2400MHz (PC4-19200) with a CAS latency of 17. If the motherboard or existing memory requires a different speed grade or lower latency, this module will not match the required specification.
Points forts
- 4GB capacity adds headroom for everyday multitasking
- DDR4 2400MHz speed moves data quickly through the system
- CL17 latency keeps response times tight
- 20V operation matches standard DDR4 voltage for broad compatibility
- 288-pin DIMM form factor fits standard desktop memory slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will this DDR4 2400 MHz CL17 module run alongside my existing DDR4 memory?
It is a standard DDR4 DIMM operating at 1.20 V with CL17 timings; the system will clock all installed modules to the lowest common speed and latency.
How can I confirm the module is running at the correct 2400 MHz speed after installation?
Check the memory frequency in your BIOS or a system information tool; it should report 2400 MT/s (PC4-19200) for this stick.
What is included in the box and do I need any extra parts to install it?
The box contains the single 4 GB 288-pin DDR4 UDIMM; no cables, brackets or additional components are required for installation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355238BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418741BTC
En stock