A-Tech
A-Tech 4GB DDR4 2666MHz CL19 934253-800 Desktop RAM
4GB DDR4 desktop memory module running at 2666MHz with CL19 latency and 1.2V operation
- Capacity4GB
- SpeedDDR4 2666 (PC4 21300)
- Tested Frequency2666
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 4GB capacity adds headroom for everyday multitasking
- DDR4 2666MHz speed matches PC4-21300 system requirements
- CL19 latency at 1.20V standard DDR4 voltage
- 288-pin unbuffered DIMM fits compatible desktop motherboards
- Tested replacement for HP 934253-800 part number
4GB DDR4 2666MHz Desktop Module
This 4GB DDR4 module runs at 2666MHz with a CAS latency of CL19 and operates at the standard 1.20V. It is built as a direct compatible replacement for the HP 934253-800 part number in desktop systems.
Unbuffered DIMM Without Heat Spreader
The stick uses a 288-pin DIMM form factor and is unbuffered non-ECC memory. It carries major brand chips but has no heat spreader, so it fits tight spaces and works with standard CPU coolers without clearance issues.
DDR4 2666MHz Speed and Voltage Limits
The DDR4 interface tops out at the 2666MHz tested frequency and PC4-21300 bandwidth rating. The fixed 1.20V voltage and CL19 timing define the performance ceiling, so the module will not exceed these specifications in any system.
Points forts
- 4GB capacity adds headroom for everyday multitasking
- DDR4 2666MHz speed matches PC4-21300 system requirements
- CL19 latency at 1.20V standard DDR4 voltage
- 288-pin unbuffered DIMM fits compatible desktop motherboards
- Tested replacement for HP 934253-800 part number
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | 934253-800 |
| Capacity | 4GB |
| Speed | DDR4 2666 (PC4 21300) |
| Tested Frequency | 2666 |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | 934253-800 |
| Recommend Use | Compatible Replacement for HP 934253-800 |
Questions sur cet article
What DDR4 standard and speed does the 934253-800 module run at?
It runs at DDR4 2666, rated as PC4-21300 with a tested frequency of 2666 MHz.
Which physical slot and pin count does this DIMM need?
It uses a standard 288-pin DDR4 DIMM slot on a desktop motherboard.
How is the module installed and what step is often missed?
Align the notch with the slot key, press down firmly until both side clips click; the step often missed is not pushing hard enough to fully seat both clips.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355155BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418643BTC
En stock