A-Tech
A-Tech 4GB DDR4 3200MHz CL22 1.2V Desktop RAM
4GB DDR4 3200MHz CL22 1.2V desktop DIMM for faster loading and smoother multitasking
- Capacity4GB
- SpeedDDR4 3200 (PC4 25600)
- Tested Frequency3200
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 4GB capacity adds headroom for everyday multitasking
- DDR4 3200MHz speed moves data quickly through the system
- CL22 latency keeps response times tight
- 2V operation reduces power draw and heat
- 288-pin DIMM fits standard desktop motherboard slots
4GB DDR4 3200MHz Desktop Module
This 4GB DDR4 DIMM runs at 3200MHz with CL22 latency and 1.2V operation. It uses a 288-pin unbuffered non-ECC design built with major brand chips. The module is tested as a direct replacement for Crucial CT4G4DFS632A and CT2K4G4DFS632A parts.
Suits basic desktop upgrades
The single 4GB stick fits older AMD and Intel platforms that support DDR4 3200 speeds. Systems needing higher capacity, lower latency, ECC protection or registered memory should choose a different kit.
Simple DIMM installation with compatibility checks
Align the notch on the 288-pin edge connector with the motherboard slot and press firmly until the retention clips click. Most issues arise when the platform cannot train at 3200MHz or when mixing modules with different timing or voltage ratings.
Points forts
- 4GB capacity adds headroom for everyday multitasking
- DDR4 3200MHz speed moves data quickly through the system
- CL22 latency keeps response times tight
- 2V operation reduces power draw and heat
- 288-pin DIMM fits standard desktop motherboard slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
What motherboard slot does the 288-pin DDR4 DIMM require?
The module fits a standard DDR4 DIMM slot on a desktop motherboard that supports 3200 MHz memory at 1.2 V.
Will the CL22 timing force slower speeds if I keep older DDR4 sticks?
The system will run all installed DDR4 modules at the lowest common speed and highest latency; this stick is rated for 3200 MHz CL22 at 1.2 V.
How can I confirm the RAM is running at 3200 MHz after installation?
Check the memory frequency in the BIOS or with a system-information tool such as CPU-Z; it should report 3200 MHz (PC4-25600) at 1.2 V.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



