A-Tech
A-Tech 8GB DDR3 1600 PC3-12800 240-Pin Desktop RAM
An 8 GB DDR3 1600 MHz desktop module with 240 pins, 1.5 V operation and non-ECC unbuffered design
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- Adds 8GB capacity for smoother multitasking
- Runs at 1600MHz DDR3 speed for responsive performance
- Operates at standard 1.50V voltage for broad compatibility
- 240-pin DIMM fits typical desktop motherboard slots
- Non-ECC unbuffered design suits standard consumer systems
8GB DDR3 1600 Desktop Module
This single 8GB DDR3 DIMM runs at 1600 MHz and is built as a direct replacement for several Samsung 8GB modules used in desktop systems. It targets owners of older AMD or Intel platforms that still rely on DDR3 memory and need a straightforward capacity upgrade.
Standard 1.5V operation with no ECC
The module operates at the standard DDR3 voltage of 1.50V and uses unbuffered, non-ECC chips. Because it draws no extra voltage and lacks registered or error-correcting circuitry, it adds minimal heat and acoustic load to a typical desktop configuration.
240-pin DIMM fits existing desktop slots
The 240-pin form factor slots directly into any desktop motherboard that accepts DDR3 UDIMMs, freeing no additional space but requiring no adapters or special cooling. Builders who need ECC, registered memory or a different DDR generation will not be served by this module.
Points forts
- Adds 8GB capacity for smoother multitasking
- Runs at 1600MHz DDR3 speed for responsive performance
- Operates at standard 1.50V voltage for broad compatibility
- 240-pin DIMM fits typical desktop motherboard slots
- Non-ECC unbuffered design suits standard consumer systems
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will this 8GB module fit my desktop's 240-pin DDR3 slots?
Yes, the module is a 240-pin DDR3 DIMM designed for standard desktop memory slots.
Does the 1.50V voltage match my system's standard DDR3 requirement?
The module runs at 1.50V, which is the standard voltage for DDR3 desktop memory.
Can I use this as a direct replacement for Samsung M378B1G73BH0-CK0?
This module is listed as a compatible replacement for that Samsung part number and several related variants.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



