Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with black memory chips, gold edge connector, no heat spreader

A-Tech

A-Tech 8GB DDR3 1600 PC3-12800 240-Pin DIMM memory upgrade

SKU CH-KHPN-0TKAR

An 8 GB DDR3 1600 MHz DIMM module for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 desktops

  • Capacity8GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 8GB

  • 8GB capacity lets you run more applications simultaneously
  • DDR3 1600 MHz speed improves data throughput for responsive performance
  • CL11 latency supports quick memory access cycles
  • 240-pin DIMM fits Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, XE2
  • Non-ECC unbuffered design installs easily in standard desktop slots

A-Tech 8GB DDR3 DIMM for Dell OptiPlex

This 240-pin DDR3 module is built for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 systems in USFF, SFF, MT and DT chassis. It adds 8GB of memory to desktops running compatible Intel 2nd, 3rd or 4th generation Core i3, i5, i7, Pentium or Celeron processors. The single unbuffered non-ECC stick installs without tools or specialist knowledge.

Speed and latency that determine compatibility

The module runs at DDR3 1600 MHz with a PC3-12800 rating and a CAS latency of CL11. It is organised as a dual-rank 2Rx8 configuration using major-brand chips. Voltage is set to the JEDEC standard 1.5 V for DDR3 or 1.35 V for DDR3L operation. Systems that require ECC, registered buffers or a different pin count will not accept this part.

Thermals noise and power draw in normal use

Without a heat spreader the DIMM relies on case airflow and operates at standard JEDEC voltages, so power draw stays low during typical workloads. The memory produces no audible noise because it has no moving parts. Temperatures remain within normal DDR3 limits when the chassis ventilation is adequate. Builders needing ECC error correction or registered modules must choose a different product.

Points forts

  • 8GB capacity lets you run more applications simultaneously
  • DDR3 1600 MHz speed improves data throughput for responsive performance
  • CL11 latency supports quick memory access cycles
  • 240-pin DIMM fits Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, XE2
  • Non-ECC unbuffered design installs easily in standard desktop slots

Caractéristiques

BrandA-Tech
SeriesOptiPlex
Model9020, 9010, 7020, 7010, 3020, 3010, XE2 (USFF/SFF/MT/DT)
Part NumberNE-MS-0001
Capacity8GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, XE2 (USFF/SFF/MT/DT)
FeaturesDesigned for Dell OptiPlex
Package Content1 Module

Autres versions de ce modèle

3 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 1600 MHz speed actually run at that rate in my OptiPlex 9020?

The module is rated for DDR3 1600, and the OptiPlex 9020 chipset supports that frequency, so it will operate at 1600 MHz without manual changes.

What does the PC3-12800 label tell me about the memory interface?

PC3-12800 is the JEDEC designation for DDR3 1600, confirming the module uses the standard 240-pin DIMM interface and runs at the industry 1.5 V or 1.35 V level.

Does the 240-pin DIMM fit the small-form-factor OptiPlex 3020 SFF?

Yes, the 240-pin DIMM is the standard desktop form factor and fits the OptiPlex 3020 SFF, MT, DT and USFF chassis listed in the compatibility table.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.