A-Tech
A-Tech 8GB DDR3L 1866MHz CL13 1.35V Desktop RAM
An 8GB DDR3L desktop module running at 1866MHz with CL13 latency and 1.35V low voltage
- Capacity8GB
- SpeedDDR3L 1866 (PC3L 14900)
- Tested Frequency1866
- CAS LatencyCL13
- Voltage1.35V
- ECCNo
- 8GB capacity adds multitasking headroom for demanding workloads
- DDR3L 1866MHz speed accelerates data throughput for responsive operation
- Low 1.35V voltage reduces power draw and system heat
- CL13 latency delivers quick access times for smoother performance
- 240-pin DIMM form factor fits standard desktop memory slots
Upgrade-Ready Desktop Memory
This 8 GB DDR3L module runs at 1866 MHz with CL13 latency and a low 1.35 V operating voltage. It is built for desktop systems that accept 240-pin unbuffered non-ECC DIMMs and uses major-brand chips for reliable operation.
Direct Crucial Replacement
The module matches the specifications of the Crucial CT102464BD186D part, making it a drop-in alternative for systems originally equipped with that memory. The jump is worth it when your current kit is slower, lower capacity, or running at a higher voltage.
Simple DIMM Installation
Insert the stick into an available 240-pin slot until the retention clips click into place. The most common issues are mixing voltages or speeds across slots, so verify that the board supports 1.35 V DDR3L at 1866 MHz before installing.
Points forts
- 8GB capacity adds multitasking headroom for demanding workloads
- DDR3L 1866MHz speed accelerates data throughput for responsive operation
- Low 1.35V voltage reduces power draw and system heat
- CL13 latency delivers quick access times for smoother performance
- 240-pin DIMM form factor fits standard desktop memory slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1866 (PC3L 14900) |
| Tested Frequency | 1866 |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will the 240-pin DIMM fit my desktop motherboard's memory slots?
The module uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop motherboard slot designed for DDR3 or DDR3L memory.
What is the correct way to seat the module, and what step do builders often miss?
Align the notch on the module's gold edge with the key in the slot, press down firmly until both side clips click shut, and verify the clips have fully locked — many builders stop pressing before the click.
When should I consider replacing this 8 GB DDR3L 1866 MHz CL13 module?
Replace it if memory diagnostics report errors, if the system becomes unstable under load, or if you move to a platform that requires a different memory generation.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



