A-Tech
A-Tech 8GB DDR4 2400 CL17 1.2V Desktop RAM
8 GB DDR4 desktop memory module running at 2400 MHz with CL17 latency and 1.2 V operation
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- Tested Frequency2400
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 8GB capacity expands multitasking headroom for everyday workloads
- DDR4 2400 speed delivers 19200 MB/s bandwidth for responsive performance
- CL17 latency keeps data access tight at standard timing
- 2V operation matches DDR4 baseline for broad platform compatibility
- 288-pin DIMM fits standard desktop slots without adapters
What this module is
This is an 8 GB DDR4 2400 CL17 1.20 V desktop DIMM built with major-brand chips. It follows the PC4-19200 standard and runs at the tested 2400 frequency with 288 pins. The unbuffered non-ECC design targets standard desktop platforms that accept DDR4 memory.
Who it suits and who it does not
The module fits AMD and Intel desktop systems that support DDR4 2400 non-ECC UDIMMs. Builders needing ECC, registered, or lower-voltage SO-DIMM memory should choose a different part. Always confirm the motherboard specification before ordering.
Installation notes
The 288-pin DIMM seats in a standard desktop DDR4 slot with a single notch alignment. Common issues arise when the slot is not fully open, when the module is forced the wrong way, or when the board requires a BIOS update to recognise the new capacity.
Points forts
- 8GB capacity expands multitasking headroom for everyday workloads
- DDR4 2400 speed delivers 19200 MB/s bandwidth for responsive performance
- CL17 latency keeps data access tight at standard timing
- 2V operation matches DDR4 baseline for broad platform compatibility
- 288-pin DIMM fits standard desktop slots without adapters
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Does the 288-pin DIMM fit a standard desktop motherboard slot?
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by desktop motherboards.
Will this 2400MHz CL17 module downclock to match slower DDR4 sticks I keep?
When mixed with slower DDR4 modules, the system will run all memory at the lowest common speed and loosest timings.
How can I confirm the module runs at 2400MHz CL17 after installation?
Check the memory tab in CPU-Z or the BIOS memory information screen; both will report the active frequency and CAS latency.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



