A-Tech
A-Tech 8GB DDR4 2400MHz CL17 1.20V Desktop RAM
8GB DDR4 2400MHz desktop memory module with CL17 latency and 1.20V operation for AMD and Intel systems
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- Tested Frequency2400
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 8GB capacity handles heavier multitasking with ease
- DDR4 2400MHz speed keeps data moving quickly
- CL17 latency supports responsive system operation
- 20V standard voltage reduces power draw
- 288-pin DIMM fits compatible desktop motherboards
8GB DDR4 2400MHz Desktop Module
This single 8GB DDR4 module runs at 2400MHz with a CL17 latency and operates at the standard 1.20V. It is built as an unbuffered, non-ECC DIMM using major brand chips for broad AMD and Intel platform compatibility.
288-Pin DIMM Build and Daily Use
The 288-pin form factor slots directly into standard desktop motherboards without extra cables or brackets. Unbuffered design keeps latency low for typical workloads while the 1.20V rating matches default DDR4 voltage, so no manual BIOS tuning is required for basic operation.
Replaces Crucial CT8G4DFD824A Kits
This module serves as a direct equivalent for Crucial part numbers CT8G4DFD824A, CT2K8G4DFD824A and CT4K8G4DFD824A. The upgrade is worthwhile when a system has free DIMM slots and the motherboard supports DDR4 2400MHz operation, adding capacity for heavier multitasking.
Points forts
- 8GB capacity handles heavier multitasking with ease
- DDR4 2400MHz speed keeps data moving quickly
- CL17 latency supports responsive system operation
- 20V standard voltage reduces power draw
- 288-pin DIMM fits compatible desktop motherboards
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
What speed does the DDR4 2400MHz interface actually run at in practice?
The module runs at 2400 MT/s, which is the PC4-19200 data rate, and the system will clock it to that speed if the motherboard supports it.
What physical slot and pin count does this 288-pin DIMM need?
It fits a standard desktop DDR4 DIMM slot with 288 pins; the module is a single 8GB stick.
How is the RAM installed, and what step do people often miss?
Power off the PC, open the case, align the notch on the 288-pin DIMM with the slot key, press firmly until the retention clips click, then verify the new 8GB appears in BIOS.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



