A-Tech
A-Tech 8GB DDR4 2400MHz CL17 Desktop Memory
An 8GB DDR4 2400MHz CL17 DIMM module tested for HP desktop compatibility
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- Tested Frequency2400
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- Boosts system responsiveness with 8GB DDR4 2400MHz capacity
- Low 1.20V voltage reduces power draw and heat
- CL17 latency supports smooth multitasking performance
- 288-pin DIMM fits standard desktop motherboard slots
- Tested compatible with HP part numbers including 900315-591
Ready to Install
This 8GB DDR4 2400MHz CL17 desktop module arrives as a single 288-pin DIMM rated at 1.20V. It is built with major-brand chips and tested at 2400 MT/s to deliver a straightforward capacity increase for everyday workloads.
Check Your System
Verify that your motherboard accepts non-ECC unbuffered DDR4 DIMMs and has a free 288-pin slot before ordering. Confirm the maximum supported frequency and whether the board can run at CL17 timings to avoid mismatched settings.
What Changes
Adding this stick raises total memory by 8GB, which reduces paging and lets you keep more applications open at once. The 1.20V operation matches standard DDR4 voltage so no manual voltage adjustment is required.
Points forts
- Boosts system responsiveness with 8GB DDR4 2400MHz capacity
- Low 1.20V voltage reduces power draw and heat
- CL17 latency supports smooth multitasking performance
- 288-pin DIMM fits standard desktop motherboard slots
- Tested compatible with HP part numbers including 900315-591
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will this module fit my HP desktop that uses part number 900315-591?
Yes, the module is listed as a direct replacement for HP part numbers 900315-591, 854913-001, 1CA80AA, 1CA80AT, Z9H60AA and Z9H60AT.
Does my motherboard need to support 1.2 V DDR4 to use this memory?
The module operates at the standard 1.2 V DDR4 voltage, so any board that accepts DDR4 DIMMs at that voltage will run it correctly.
Can I add this single 8 GB stick alongside an existing 8 GB stick for dual-channel operation?
Dual-channel works when two identical modules are installed in the correct slots; this kit provides one 8 GB DIMM, so you would need a matching second stick.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



