A-Tech
A-Tech 8GB DDR4 2400MHz CL17 SODIMM for Micron MTA8ATF1G64HZ Laptop RAM
An 8 GB DDR4 2400 MHz SODIMM module with CL17 latency and 1.20 V operation for compatible laptops
- Capacity8GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- Boosts multitasking with 8 GB DDR4 2400 MHz speed
- Low 1.20 V voltage cuts power draw and heat
- CL17 latency sharpens system responsiveness
- 260-pin SODIMM fits standard laptop slots
- Tested replacement for Micron MTA8ATF1G64HZ series
8GB DDR4 2400 SODIMM laptop memory
This A-Tech module delivers 8GB of DDR4 2400MHz speed in a 260-pin SO-DIMM form factor. It runs at 1.20V with CL17 latency and is unbuffered non-ECC. The stick is a compatible replacement for Micron MTA8ATF1G64HZ series modules. Quality testing ensures dependable performance for notebook and all-in-one systems.
Suits owners upgrading compatible AMD
Builders needing ECC error correction or registered signal buffering should look elsewhere. Systems limited to lower voltage standards or different pin layouts cannot use this memory. Buyers who want more storage capacity than a single 8GB module provides will need additional slots or higher-density parts.
DDR4 2400MHz speed rating
The PC4-19200 specification determines whether your platform can run this module at its rated frequency. Verify your system supports DDR4 2400 before purchase to ensure compatibility.
Points forts
- Boosts multitasking with 8 GB DDR4 2400 MHz speed
- Low 1.20 V voltage cuts power draw and heat
- CL17 latency sharpens system responsiveness
- 260-pin SODIMM fits standard laptop slots
- Tested replacement for Micron MTA8ATF1G64HZ series
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Will the 260-pin DDR4 SODIMM fit my laptop's memory slot?
The module uses the standard 260-pin DDR4 SODIMM form factor, which fits any laptop slot designed for DDR4 SO-DIMM memory.
What is the correct way to seat the module so it locks in place?
Align the notch with the slot key, insert at a slight angle, press down firmly until both side clips click, then verify the gold contacts are fully hidden.
How long will this 1.20V DDR4 module last before needing replacement?
DDR4 SODIMMs have no moving parts and typically last the usable life of the laptop; replacement is only needed if a fault develops or capacity becomes insufficient.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Silverstone RM22-312 2U 12-bay 2.5" / 3.5" server chassis
- Rackmount
iStarUSA Inc. D400-6SE-B6SA-SL 4U Rackmount Server Chassis 6 Hot-Swap Bays
- Rackmount
- 4U



