A-Tech
A-Tech 8GB DDR4 3200MHz CL22 1.2V 288-pin DIMM desktop RAM
8GB DDR4 3200MHz CL22 1.2V 288-pin DIMM desktop memory module for system upgrades
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- Tested Frequency3200
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 8GB capacity adds headroom for everyday multitasking
- 3200MHz DDR4 speed keeps data moving quickly
- CL22 latency balances timing with stable operation
- 2V standard voltage reduces power draw and heat
- 288-pin DIMM fits mainstream desktop motherboards
8GB DDR4 3200MHz desktop module
This single 8GB DIMM runs at DDR4 3200 with a tested frequency of 3200MT/s and CL22 latency. It operates at the standard 1.20V and uses an unbuffered, non-ECC layout. The 288-pin form factor fits typical desktop slots for straightforward capacity upgrades.
Sustained workload behaviour
Under continuous load the module maintains its rated 3200MT/s speed and CL22 timing without dropping to lower JEDEC profiles. Major-brand chips provide stable signal integrity during extended multitasking or rendering sessions. The 1Rx16 organisation keeps data paths consistent across long runs.
Thermals noise and power
At 1.20V the stick draws only the standard DDR4 voltage, so heat output stays low inside a normal chassis airflow. No onboard fan or heatsink is required, leaving the module silent during operation. Power draw remains modest, matching the baseline for DDR4 desktop memory.
Points forts
- 8GB capacity adds headroom for everyday multitasking
- 3200MHz DDR4 speed keeps data moving quickly
- CL22 latency balances timing with stable operation
- 2V standard voltage reduces power draw and heat
- 288-pin DIMM fits mainstream desktop motherboards
Caractéristiques
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions sur cet article
Does the 1.20V 3200MHz module run cool and quiet during all-day workloads?
The stick operates at the standard DDR4 voltage of 1.20V with no active cooling required, so it adds negligible heat and makes no noise of its own.
What motherboard slot and CPU memory controller are needed for this 288-pin DIMM to function?
You need a desktop board with a DDR4 288-pin DIMM slot and a processor whose integrated memory controller supports DDR4; the module is unbuffered non-ECC so it works with standard consumer CPUs.
Will this CL22 3200MHz stick downclock automatically when paired with slower DDR4 modules?
Yes, JEDEC SPD lets the module drop to the highest common speed and matching timings supported by the other installed DIMMs.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00355238BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00418741BTC
En stock