A-Tech
A-Tech 8GB DDR5 4800 CL40 desktop RAM for PNY MD8GSD54800-TB
An 8 GB DDR5 desktop module for PNY MD8GSD54800-TB running at 4800 MHz with CL40 latency and 1.1 V operation
- Capacity8GB
- SpeedDDR5 4800 (PC5 38400)
- Tested Frequency4800
- CAS LatencyCL40
- Voltage1.10V
- ECCNo
- 8GB DDR5 4800MHz module boosts multitasking capacity
- CL40 latency supports responsive desktop performance
- 1V standard voltage reduces power draw
- 288-pin DIMM fits standard desktop memory slots
- Tested 4800MHz frequency ensures reliable operation
Capacity and purpose
This 8 GB DDR5 module is built as a direct replacement for the PNY MD8GSD54800-TB. It targets desktop owners who need a single stick to restore or expand system memory without changing platform.
Speed and voltage limits
The stick runs at 4800 MT/s with a CL40 latency at the standard 1.1 V DDR5 voltage. The PC5-38400 rating defines the maximum bandwidth the memory controller can sustain, so the module will not exceed that ceiling even if the board supports higher data rates.
Installation notes
The 288-pin DIMM seats in any standard desktop DDR5 slot; no heat spreader means a low profile that clears most CPU coolers. The usual mistake is mixing this unbuffered non-ECC stick with registered or ECC modules, which prevents the system from posting. Verify the motherboard accepts 4800 MT/s DDR5 before fitting.
Points forts
- 8GB DDR5 4800MHz module boosts multitasking capacity
- CL40 latency supports responsive desktop performance
- 1V standard voltage reduces power draw
- 288-pin DIMM fits standard desktop memory slots
- Tested 4800MHz frequency ensures reliable operation
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for PNY |
| Model | MD8GSD54800-TB |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | MD8GSD54800-TB |
| Recommend Use | Compatible Replacement for PNY MD8GSD54800-TB |
Questions sur cet article
Will this DDR5 module fit a standard desktop DIMM slot?
The module uses the 288-pin DDR5 DIMM form factor required by current desktop platforms.
What voltage does the memory run at and is it standard for DDR5?
It operates at 1.1V, which is the standard voltage for DDR5 desktop memory.
Is the module compatible with the PNY MD8GSD54800-TB part it replaces?
The product is tested as a compatible replacement for the PNY MD8GSD54800-TB module.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



