A-Tech
A-Tech 8GB DDR5-4800 Desktop RAM Module for Kingston KCP548US6-8
8GB DDR5-4800 desktop module, CL40 at 1.1 V, 288-pin unbuffered non-ECC, compatible replacement for Kingston KCP548US6-8
- Capacity8GB
- SpeedDDR5 4800 (PC5 38400)
- Tested Frequency4800
- CAS Latency40
- Voltage1.10V
- ECCNo
- 8GB capacity handles heavier workloads
- DDR5 4800 speed accelerates data throughput
- CL40 latency supports responsive operation
- 10V voltage reduces power draw
- 288-pin DIMM fits standard desktop slots
8GB DDR5-4800 Desktop Module
This A-Tech module delivers 8GB of DDR5 memory at 4800MHz with CAS latency 40. It operates at the standard 1.10V DDR5 voltage and uses a 288-pin unbuffered DIMM form factor. The single-rank 1Rx16 design employs major-brand DRAM ICs for dependable desktop performance.
Drop-in Kingston KCP548US6-8 replacement
The module is validated as a direct replacement for the Kingston KCP548US6-8 part number. It suits owners of that specific Kingston kit or any desktop board accepting DDR5-4800 non-ECC UDIMMs. Builders needing ECC, registered buffers, higher capacities or faster JEDEC speeds should select a different module.
Fits standard DDR5 desktop slots
Installation requires a motherboard with a DDR5 DIMM slot and a CPU memory controller that supports the 4800MT/s data rate. The low 1.10V operating voltage reduces power draw compared to previous DDR generations. No heat spreader is fitted, leaving clearance for larger CPU coolers in compact chassis.
Points forts
- 8GB capacity handles heavier workloads
- DDR5 4800 speed accelerates data throughput
- CL40 latency supports responsive operation
- 10V voltage reduces power draw
- 288-pin DIMM fits standard desktop slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston KCP548US6-8 |
| Model | A-Tech 8GB DDR5-4800 Desktop RAM Module |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand DRAM IC Chips |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Kingston KCP548US6-8 |
Questions sur cet article
Does my motherboard need a DDR5 DIMM slot for this 288-pin module?
Yes, this is a DDR5 4800 DIMM with 288 pins and requires a motherboard that supports DDR5 memory.
Can I mix this 1Rx16 CL40 stick with older DDR5 modules running at 4800 MT/s?
It will run at the lowest common speed and timings; matching rank and CAS latency 40 gives the best stability.
How do I confirm the module is running at 4800 MT/s after installation?
Check the memory frequency in BIOS or a system utility such as CPU-Z; it should report 4800 MT/s at 1.1 V with CL40 timings.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



