A-Tech
A-Tech 8GB DDR5 5600 Desktop RAM 1Rx16 1.1V
8GB DDR5 5600 desktop module, 1Rx16 at 1.1V, CL40, 288-pin unbuffered non-ECC
- Capacity8GB
- SpeedDDR5 5600 (PC5 44800)
- Tested Frequency5600
- CAS Latency40
- Voltage1.10V
- ECCNo
- 8GB capacity lets you run more apps simultaneously
- DDR5 5600 speed moves data at PC5-44800 bandwidth
- 1V operation keeps power draw low
- 1Rx16 single-rank layout simplifies memory controller load
- 288-pin DIMM form factor fits standard desktop slots
Capacity and Compatibility
This 8 GB DDR5 module runs at 5600 MHz with a CAS latency of 40 and 1.10 V operation. It is an unbuffered, non-ECC DIMM built with major-brand DRAM ICs and designed as a direct replacement for the Crucial CT2K8G56C46U5 kit.
Thermals and Power
The stick operates at the standard DDR5 voltage of 1.10 V and has no heat spreader, so it relies on normal chassis airflow for cooling. Power draw stays within the baseline DDR5 specification during typical desktop workloads.
Build Integration
The 288-pin DIMM fits any desktop motherboard slot wired for DDR5 memory. Its single-rank 1Rx16 organisation leaves the second channel free for a matching module, and the green-and-black PCB clears standard CPU coolers without height conflicts.
Points forts
- 8GB capacity lets you run more apps simultaneously
- DDR5 5600 speed moves data at PC5-44800 bandwidth
- 1V operation keeps power draw low
- 1Rx16 single-rank layout simplifies memory controller load
- 288-pin DIMM form factor fits standard desktop slots
Caractéristiques
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Crucial CT2K8G56C46U5 |
| Model | A-Tech 8GB DDR5-5600 Desktop RAM Module |
| Capacity | 8GB |
| Speed | DDR5 5600 (PC5 44800) |
| Tested Frequency | 5600 |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand DRAM IC Chips |
| Color | Green/Black |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Crucial CT2K8G56C46U5 |
Questions sur cet article
How do I install this 288-pin DDR5 DIMM and what step do people often miss?
Align the notch on the module with the slot key, press down firmly until both side clips click shut, then verify the BIOS shows 5600 MT/s — many forget to seat it fully so the clips engage.
What maintenance or replacement will this 8 GB 1Rx16 module need later?
No scheduled maintenance is required; if a future upgrade demands more capacity, replace the module with a higher-density DDR5 DIMM of the same voltage and pin count.
What limit appears first under sustained load with this CL40 1.1 V kit?
The CAS latency of 40 cycles at 5600 MT/s sets the timing floor; thermal throttling is unlikely without a heat spreader, so latency remains the primary constraint.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



