Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with black chips, 288-pin DDR5 DIMM, no heat spreader

A-Tech

A-Tech 8GB DDR5-5600 Desktop RAM Module

SKU CH-VSNT-KXYNV

An 8 GB DDR5 desktop module running at 5600 MHz with CAS latency 40 and 1.10 V on a 288-pin DIMM

  • Capacity8GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS Latency40
  • Voltage1.10V
  • ECCNo
  • Boosts multitasking with 8GB DDR5-5600 capacity
  • Runs at 5600MHz speed for faster data transfer
  • Low 1.10V voltage reduces power consumption
  • 288-pin DIMM fits standard desktop slots
  • CL40 latency supports responsive system performance

Ready for Dell DDR5 Desktops

This A-Tech module is built as a direct replacement for the Dell SNPGDGT0C/8G part. It brings 8 GB of DDR5 memory to compatible desktop systems that require a 288-pin DIMM running at 5600 MT/s.

Suits Non-ECC Platforms Only

The stick is unbuffered and non-ECC, so it fits standard consumer desktops that accept 1Rx16 modules at 1.1 V. Systems that require registered or error-correcting memory will not work with this unit.

Speed Decides Compatibility

The rated data rate is 5600 MT/s, labelled PC5-44800, with a CAS latency of 40. If your motherboard or Dell chassis specifies a different DDR5 speed grade, this module will not match the required timing.

Points forts

  • Boosts multitasking with 8GB DDR5-5600 capacity
  • Runs at 5600MHz speed for faster data transfer
  • Low 1.10V voltage reduces power consumption
  • 288-pin DIMM fits standard desktop slots
  • CL40 latency supports responsive system performance

Caractéristiques

BrandA-Tech
SeriesCompatible Replacement for Dell SNPGDGT0C/8G
ModelA-Tech 8GB DDR5-5600 Desktop RAM Module
Capacity8GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS Latency40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseCompatible Replacement for Dell SNPGDGT0C/8G

Questions sur cet article

Is the 8 GB module the only capacity offered for this DDR5-5600 stick?

The listing shows a single 8 GB DIMM; no other capacities are mentioned for this part number.

What does the 5600 MT/s rating mean when the module is installed in a desktop?

The memory runs at 5600 MT/s with CAS 40 at 1.1 V, delivering the standard DDR5 JEDEC speed without overclocking.

Does the 288-pin DDR5 DIMM fit every desktop board that has DDR5 slots?

It uses the standard 288-pin DDR5 DIMM form factor; compatibility still depends on the motherboard’s qualified-vendor list.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.