Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Rectangular aluminium chassis, dual front and rear fans, integrated power supply cables

AFRNDK

AFRNDK Antminer L3++ 580MH/s Scrypt Mining Hardware

SKU CH-ZNMK-XS6YS

Scrypt ASIC miner delivering 580 MH/s at 942 W with dual fans rated at 76 dB, Ethernet connectivity, and 288 BM1485 chips across four hash boards

  • Crypto AlgorithmScrypt
  • Compatible CurrencyLTC Dogecoin
  • Hashrate580MH/s
  • Network ConnectionEthernet
  • Noise level76dB
  • Fan2
  • Scrypt ASIC delivers 580 MH/s for Litecoin and Dogecoin mining
  • BM1485 chip array with 288 chips provides high hash-rate efficiency
  • 942 W power draw at 1.62 J/MH keeps energy costs predictable
  • Dual-fan aluminium chassis with independent heatsinks maintains 76 dB noise level
  • Ethernet connectivity and 0–40 °C operating range suit continuous farm deployment

Scrypt ASIC Miner for Litecoin and Dogecoin

This unit delivers a 580 MH/s hashrate on the Scrypt algorithm using 288 BM1485 chips. It targets miners who want a dedicated ASIC for Litecoin and Dogecoin rather than GPU-based rigs. The hardware ships with a power supply and cables included.

Upgrade from older Scrypt ASICs

The L3++ replaces earlier Antminer L3 and L3+ models with higher hash density and 1.62 J/MH efficiency at the wall. The jump is worth it when your electricity cost makes the 942 W draw sustainable and you need the 580 MH/s throughput in a single chassis.

Check power and environment before ordering

Verify you can supply 11.60–13.00 V DC at the required amperage and that ambient temperature stays between 0 °C and 40 °C. The 76 dB noise level and dual-fan airflow demand adequate ventilation. Each of the four hash boards must connect to a single power source per board.

Points forts

  • Scrypt ASIC delivers 580 MH/s for Litecoin and Dogecoin mining
  • BM1485 chip array with 288 chips provides high hash-rate efficiency
  • 942 W power draw at 1.62 J/MH keeps energy costs predictable
  • Dual-fan aluminium chassis with independent heatsinks maintains 76 dB noise level
  • Ethernet connectivity and 0–40 °C operating range suit continuous farm deployment

Caractéristiques

BrandBitmain
SeriesAntminer l3
Modelantminer l3++
Crypto AlgorithmScrypt
Compatible CurrencyLTC Dogecoin
Hashrate580MH/s
Network ConnectionEthernet
Noise level76dB
Fan2
Power Consumption942W

Questions sur cet article

What DC voltage range does the Antminer L3++ require?

The unit accepts 11.60 V to 13.00 V DC input. Use a power supply that stays within this window for stable operation.

How do I connect the four hash boards to the PSU without causing a fault?

Power each of the four hash boards from a single, independent PSU output. Do not split one board across multiple PSU cables and do not share a PSU cable between two boards.

When should I replace the two cooling fans on the L3++?

Replace the fans if noise rises above the rated 76 dB, if RPM drops noticeably, or if the miner reaches the 40 °C operating limit during normal use.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.