AFRNDK
AFRNDK Antminer S9i 14TH/s SHA-256 mining hardware
SHA-256 ASIC miner delivering 14 TH/s at 1350 W with 189 chips, dual 12038 fans at 76 dB, and 93.12 J/TH efficiency
- Crypto AlgorithmSHA-256
- Hashrate14.5±5%
- Quantity of Hash Chips189
- Network ConnectionEthernet
- Noise level76dB
- Fan2
- 5 TH/s SHA-256 hashrate for Bitcoin mining
- 12 J/TH power efficiency reduces electricity cost
- 1350 W draw from included APW7 PSU
- 76 dB noise with dual 12038 fans
- 0–40 °C operating range suits varied environments
SHA-256 ASIC miner for Bitcoin networks
The Antminer S9i delivers a nominal 14.5 TH/s hashrate with a ±5% tolerance across 189 ASIC chips. It connects via Ethernet and draws 1350 W at the wall. The unit is built for continuous operation in the 0–40 °C range.
Efficiency bound by 93.12 J/TH
Power efficiency is fixed at 93.12 J/TH, so total consumption scales directly with hashrate. The hash boards require three PCIe +12 V connectors each, all fed from a single PSU; mixing supplies on one board is prohibited. Ambient temperature and PSU efficiency shift actual draw.
76 dB noise from dual 12038 fans at 6000/4300 rpm
Cooling relies on a front fan at 6000 rpm and a rear fan at 4300 rpm, producing a constant 76 dB sound level. This acoustic output suits dedicated mining spaces rather than office or home environments. No alternative fan curve or silent mode is specified.
Points forts
- 5 TH/s SHA-256 hashrate for Bitcoin mining
- 12 J/TH power efficiency reduces electricity cost
- 1350 W draw from included APW7 PSU
- 76 dB noise with dual 12038 fans
- 0–40 °C operating range suits varied environments
Caractéristiques
| Brand | Antminer |
|---|---|
| Series | S9 |
| Model | S9i |
| Crypto Algorithm | SHA-256 |
| Hashrate | 14.5±5% |
| Quantity of Hash Chips | 189 |
| Network Connection | Ethernet |
| Noise level | 76dB |
| Fan | 2 |
| Power Consumption | 1350 W |
Questions sur cet article
What power supply connections are required for each hashing board?
Each hashing board needs all three PCI-e connectors for +12 V DC input connected to the PSU. Do not attach more than one PSU to the same board.
What are the operating temperature and humidity limits for the miner?
The unit runs from 0 to 40 °C with humidity between 5 % and 95 % RH, avoiding condensation.
How much noise does the miner produce and what fans are used?
Noise is 76 dB. Cooling uses two 12038 fans: the front fan spins at 6000 rpm and the rear fan at 4300 rpm.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



